印染助剂
印染助劑
인염조제
TEXTILE AUXILIARIES
2008年
2期
16-18
,共3页
杨海涛%周向东%张桃勇%王哲文
楊海濤%週嚮東%張桃勇%王哲文
양해도%주향동%장도용%왕철문
富马酸(FA)%丙烯酸(AA)%二元共聚物%合成
富馬痠(FA)%丙烯痠(AA)%二元共聚物%閤成
부마산(FA)%병희산(AA)%이원공취물%합성
以富马酸(FA)与丙烯酸(AA)为原料、过硫酸钠为引发剂,采用溶液聚合法和单体滴加工艺合成了一种二元共聚物P(FA-AA).考察了原料配比、单体质量分数、引发剂质量分数、反应温度、反应时间对共聚物P(FA-AA)性能的影响因素.优选了合成工艺条件:m(AA):m(FA)=12:1,w(单体)=40%,w(引发剂)=5%,85℃,4 h,用氢氧化钠溶液中和到pH=7~8.测试了P(FA-AA)的主要性能,结果表明:共聚物P(FA-AA)的性能可以满足纺织品皂洗的要求(干摩擦牢度为4~5级,湿摩擦牢度为3级,防沾色牢度为4级).
以富馬痠(FA)與丙烯痠(AA)為原料、過硫痠鈉為引髮劑,採用溶液聚閤法和單體滴加工藝閤成瞭一種二元共聚物P(FA-AA).攷察瞭原料配比、單體質量分數、引髮劑質量分數、反應溫度、反應時間對共聚物P(FA-AA)性能的影響因素.優選瞭閤成工藝條件:m(AA):m(FA)=12:1,w(單體)=40%,w(引髮劑)=5%,85℃,4 h,用氫氧化鈉溶液中和到pH=7~8.測試瞭P(FA-AA)的主要性能,結果錶明:共聚物P(FA-AA)的性能可以滿足紡織品皂洗的要求(榦摩抆牢度為4~5級,濕摩抆牢度為3級,防霑色牢度為4級).
이부마산(FA)여병희산(AA)위원료、과류산납위인발제,채용용액취합법화단체적가공예합성료일충이원공취물P(FA-AA).고찰료원료배비、단체질량분수、인발제질량분수、반응온도、반응시간대공취물P(FA-AA)성능적영향인소.우선료합성공예조건:m(AA):m(FA)=12:1,w(단체)=40%,w(인발제)=5%,85℃,4 h,용경양화납용액중화도pH=7~8.측시료P(FA-AA)적주요성능,결과표명:공취물P(FA-AA)적성능가이만족방직품조세적요구(간마찰뇌도위4~5급,습마찰뇌도위3급,방첨색뇌도위4급).