船舶力学
船舶力學
선박역학
JOURNAL OF SHIP MECHANICS
2007年
4期
587-593
,共7页
吴晓源%詹志鹄%黄小平%崔维成
吳曉源%詹誌鵠%黃小平%崔維成
오효원%첨지곡%황소평%최유성
焊接修理%表面缺陷%应力集中系数%有限元%FPSO%疲劳
銲接脩理%錶麵缺陷%應力集中繫數%有限元%FPSO%疲勞
한접수리%표면결함%응력집중계수%유한원%FPSO%피로
对焊缝处出现的裂纹进行修理以阻止其进一步扩展,能够有效地延长FPSO焊接结构的疲劳寿命.考虑到应力集中而造成的疲劳寿命的降低,要谨慎选取修理时所采用的形状和尺寸,避免在修理后产生的表面缺陷处出现过高的应力集中.文中旨在进行三维T型焊接节点焊趾处的裂纹修理分析,为了选取合理的修理切口,首先对不同几何形状和尺寸的二维焊接修理切口,如抛物线型和椭圆型等,进行了应力集中系数的计算,并与相类似尺寸的U型切口的计算结果进行了比较.结果表明,当切口的表面半宽长于其深度时,椭圆型的裂纹修理切口具有更低的应力集中系数.随后,选择应力集中较小的椭圆型和U型切口焊接修理形状,并采用更加精确的三维有限元分析方法进行分析,给出了通过打磨等修理方式消除裂纹后得到的三维表面缺陷的应力集中系数,为工程上焊趾处裂纹的修理提供决策依据.
對銲縫處齣現的裂紋進行脩理以阻止其進一步擴展,能夠有效地延長FPSO銲接結構的疲勞壽命.攷慮到應力集中而造成的疲勞壽命的降低,要謹慎選取脩理時所採用的形狀和呎吋,避免在脩理後產生的錶麵缺陷處齣現過高的應力集中.文中旨在進行三維T型銲接節點銲趾處的裂紋脩理分析,為瞭選取閤理的脩理切口,首先對不同幾何形狀和呎吋的二維銲接脩理切口,如拋物線型和橢圓型等,進行瞭應力集中繫數的計算,併與相類似呎吋的U型切口的計算結果進行瞭比較.結果錶明,噹切口的錶麵半寬長于其深度時,橢圓型的裂紋脩理切口具有更低的應力集中繫數.隨後,選擇應力集中較小的橢圓型和U型切口銲接脩理形狀,併採用更加精確的三維有限元分析方法進行分析,給齣瞭通過打磨等脩理方式消除裂紋後得到的三維錶麵缺陷的應力集中繫數,為工程上銲趾處裂紋的脩理提供決策依據.
대한봉처출현적렬문진행수리이조지기진일보확전,능구유효지연장FPSO한접결구적피로수명.고필도응력집중이조성적피로수명적강저,요근신선취수리시소채용적형상화척촌,피면재수리후산생적표면결함처출현과고적응력집중.문중지재진행삼유T형한접절점한지처적렬문수리분석,위료선취합리적수리절구,수선대불동궤하형상화척촌적이유한접수리절구,여포물선형화타원형등,진행료응력집중계수적계산,병여상유사척촌적U형절구적계산결과진행료비교.결과표명,당절구적표면반관장우기심도시,타원형적렬문수리절구구유경저적응력집중계수.수후,선택응력집중교소적타원형화U형절구한접수리형상,병채용경가정학적삼유유한원분석방법진행분석,급출료통과타마등수리방식소제렬문후득도적삼유표면결함적응력집중계수,위공정상한지처렬문적수리제공결책의거.