半导体学报
半導體學報
반도체학보
CHINESE JOURNAL OF SEMICONDUCTORS
2008年
3期
428-432
,共5页
黄晓东%黄见秋%秦明%黄庆安
黃曉東%黃見鞦%秦明%黃慶安
황효동%황견추%진명%황경안
电容式压力传感器%电致伸缩%pn结自停止腐蚀%粘结剂键合%线性度
電容式壓力傳感器%電緻伸縮%pn結自停止腐蝕%粘結劑鍵閤%線性度
전용식압력전감기%전치신축%pn결자정지부식%점결제건합%선성도
capacitive pressure senor%electrostriction%pn junction self-stop etching%adhesive bonding%linearity
提出了一种新的电容式压力传感器.传感器结构为由Al/SiO2/n-type Si等三层方形膜构成的固态电容.传感器采用pn结自停止腐蚀和粘结剂键合的方式制造,制造过程仅需三块掩模板.对不同边长传感器进行测试,在410~1010hPa的动态范围,边长为1000,1200和1400靘的压力传感器,相应灵敏度分别为1.8,2.3和3.6fF/hPa.边长为1500靘的传感器,其灵敏度为4.6fF/hPa,全程非线性度为6.4%,最大滞回误差为3.6%.分析结果表明介电常数变化是引起电容变化的主要原因.
提齣瞭一種新的電容式壓力傳感器.傳感器結構為由Al/SiO2/n-type Si等三層方形膜構成的固態電容.傳感器採用pn結自停止腐蝕和粘結劑鍵閤的方式製造,製造過程僅需三塊掩模闆.對不同邊長傳感器進行測試,在410~1010hPa的動態範圍,邊長為1000,1200和1400靘的壓力傳感器,相應靈敏度分彆為1.8,2.3和3.6fF/hPa.邊長為1500靘的傳感器,其靈敏度為4.6fF/hPa,全程非線性度為6.4%,最大滯迴誤差為3.6%.分析結果錶明介電常數變化是引起電容變化的主要原因.
제출료일충신적전용식압력전감기.전감기결구위유Al/SiO2/n-type Si등삼층방형막구성적고태전용.전감기채용pn결자정지부식화점결제건합적방식제조,제조과정부수삼괴엄모판.대불동변장전감기진행측시,재410~1010hPa적동태범위,변장위1000,1200화1400정적압력전감기,상응령민도분별위1.8,2.3화3.6fF/hPa.변장위1500정적전감기,기령민도위4.6fF/hPa,전정비선성도위6.4%,최대체회오차위3.6%.분석결과표명개전상수변화시인기전용변화적주요원인.
A novel capacitive pressure sensor is presented,whose sensing structure is a solid-state capacitor consisting of three square membranes with Al/SiO2/n-type silicon. It was fabricated using pn junction self-stop etching combined with adhesive bonding, and only three masks were used during the process. Sensors with side lengths of 1000,1200, and 1400μm were fabricated,showing sensitivity of 1.8,2.3, and 3.6fF/hPa over the range of 410~1010hPa, respectively. The sensi- tivity of the sensor with a side length of 1500μm is 4. 6fF/hPa,the nonlinearity is 6.4% ,and the max hysteresis is 3.6%. The results show that permittivity change plays an important part in the capacitance change.