兵器材料科学与工程
兵器材料科學與工程
병기재료과학여공정
Ordnance Material Science and Engineering
2009年
6期
61-63
,共3页
胡丽萍%王智慧%郭领%侯圣英%韩肃
鬍麗萍%王智慧%郭領%侯聖英%韓肅
호려평%왕지혜%곽령%후골영%한숙
倾角%陶瓷%铝合金%复合靶板%抗弹性能
傾角%陶瓷%鋁閤金%複閤靶闆%抗彈性能
경각%도자%려합금%복합파판%항탄성능
obliquity%ceramic/aluminum alloy%composite armor%ballistic property
采用12.7 mm穿燃弹,进行陶瓷/铝合金复合靶板在不同倾角下的侵彻试验,研究靶板倾角对抗弹性能的影响.结果表明:随着倾角的增大,靶板的局部防护系数单调增加,表明防护能力在增加;陶瓷面板与背板粘合后靶板的局部防护系数显著高于面板与背板未粘合的情况.
採用12.7 mm穿燃彈,進行陶瓷/鋁閤金複閤靶闆在不同傾角下的侵徹試驗,研究靶闆傾角對抗彈性能的影響.結果錶明:隨著傾角的增大,靶闆的跼部防護繫數單調增加,錶明防護能力在增加;陶瓷麵闆與揹闆粘閤後靶闆的跼部防護繫數顯著高于麵闆與揹闆未粘閤的情況.
채용12.7 mm천연탄,진행도자/려합금복합파판재불동경각하적침철시험,연구파판경각대항탄성능적영향.결과표명:수착경각적증대,파판적국부방호계수단조증가,표명방호능력재증가;도자면판여배판점합후파판적국부방호계수현저고우면판여배판미점합적정황.
In order to investigate the influence of obliquity on the ballistic properties of ceramic/aluminum armors,the 12.7 mm Armor Piercing (AP) projectiles were fired at ceramic/aluminum target at the different obliquity. It was found that ballistic properties increase with obliquity. Partial protection efficiency of armors with back plate and face plate bonded together is always higher than that not bonded together.
