中国给水排水
中國給水排水
중국급수배수
CHINA WATER & WASTEWATER
2009年
22期
63-65
,共3页
含油废水%技术改造%A/O工艺
含油廢水%技術改造%A/O工藝
함유폐수%기술개조%A/O공예
oily wastewater%technical reconstruction%A/O process
大庆石化公司炼油厂废水处理设施能力不足,出水水质也不能满足要求.采用除油/均质/气浮/前置硝化反硝化(A/O)/过滤工艺对原工艺和设备进行改造扩容后,系统处理能力由原来的600 m~3/h提高至800 m~3/h.出水水质满足回用水装置进水要求.
大慶石化公司煉油廠廢水處理設施能力不足,齣水水質也不能滿足要求.採用除油/均質/氣浮/前置硝化反硝化(A/O)/過濾工藝對原工藝和設備進行改造擴容後,繫統處理能力由原來的600 m~3/h提高至800 m~3/h.齣水水質滿足迴用水裝置進水要求.
대경석화공사련유엄폐수처리설시능력불족,출수수질야불능만족요구.채용제유/균질/기부/전치초화반초화(A/O)/과려공예대원공예화설비진행개조확용후,계통처리능력유원래적600 m~3/h제고지800 m~3/h.출수수질만족회용수장치진수요구.
The original treatment facilities of refinery wastewater in Daqing Petrochemical Company had low capacity and the effluent quality could not meet the requirements. After the rebuilding and exten-sion by oil removal equalization/air flotation/pre-nitrification and denitrification (A/O)/filtration, the treatment capacity of the system is increased from 600 m~3/h to 800 m~3/h. The effluent quality meets the requirement of wastewater reclamation unit.
