锻压技术
鍛壓技術
단압기술
FORGING & STAMPING TECHNOLOGY
2011年
2期
1-4
,共4页
大型锻件%大型封头%模拟技术%锻造工艺
大型鍛件%大型封頭%模擬技術%鍛造工藝
대형단건%대형봉두%모의기술%단조공예
通过采用物理模拟和数值模拟相结合的方法,研究了大型封头终锻成形过程中塑性成形规律和影响因素,掌握了型砧对于变形以及产生裂纹的影响作用效果.实验结果表明:增大上型砧的倒角有利于减弱心部压实效果,凹型下砧有利于减少锻件下表面裂纹和内部夹杂性裂纹的产生.研究结果对于制定合理的终锻成形工艺具有支撑作用.
通過採用物理模擬和數值模擬相結閤的方法,研究瞭大型封頭終鍛成形過程中塑性成形規律和影響因素,掌握瞭型砧對于變形以及產生裂紋的影響作用效果.實驗結果錶明:增大上型砧的倒角有利于減弱心部壓實效果,凹型下砧有利于減少鍛件下錶麵裂紋和內部夾雜性裂紋的產生.研究結果對于製定閤理的終鍛成形工藝具有支撐作用.
통과채용물리모의화수치모의상결합적방법,연구료대형봉두종단성형과정중소성성형규률화영향인소,장악료형침대우변형이급산생렬문적영향작용효과.실험결과표명:증대상형침적도각유리우감약심부압실효과,요형하침유리우감소단건하표면렬문화내부협잡성렬문적산생.연구결과대우제정합리적종단성형공예구유지탱작용.