化工新型材料
化工新型材料
화공신형재료
NEW CHEMICAL MATERIALS
2012年
5期
81-83,89
,共4页
张楠%陈海路%胡书春%仇迎%金佥%王秋桐%田馨%王伟
張楠%陳海路%鬍書春%仇迎%金僉%王鞦桐%田馨%王偉
장남%진해로%호서춘%구영%금첨%왕추동%전형%왕위
碳纳米管%化学镀镍%电导率%电磁参数%吸波性能
碳納米管%化學鍍鎳%電導率%電磁參數%吸波性能
탄납미관%화학도얼%전도솔%전자삼수%흡파성능
首先对碳纳米管( CNTs)进行纯化、敏化、活化预处理,然后利用化学镀方法在其表面沉积金属镍而制备出镀镍碳纳米管(M-CNTs).SEM、TEM、EDS、XRD和DSC等综合表征结果表明,通过化学镀工艺,在CNTs表面均匀连续的镀覆了一层厚度约为20nm的非晶态镍镀层,且碳纳米管的分散性得到了改善,更有利于用于复合材料领域.原料碳纳米管和镀镍碳纳米管的电磁学性能的对比研究结果表明,M-CNTs的电导率较CNTs有所降低,这也间接反映了镍镀层在CNTs表面的形成;在4~18GHz内,MCNTs的ε′、ε″、μ"和μ"4个电磁参数均较CNTs均有所增加.在此基础上,进一步以M-CNTs为吸波剂,聚氨酯(PU)为粘结剂,制备了PU/M-CNTs吸波涂料,对其吸波性能的研究结果表明,PU/M-CNTs吸波涂料的吸波效果明显受涂层厚度影响,在1.0~2.0mm的范围内,随着涂层厚度的逐渐增大,其吸收峰逐渐向低频移动,且低频段的吸波效果得以加强,高频段的吸波效果有所减弱.
首先對碳納米管( CNTs)進行純化、敏化、活化預處理,然後利用化學鍍方法在其錶麵沉積金屬鎳而製備齣鍍鎳碳納米管(M-CNTs).SEM、TEM、EDS、XRD和DSC等綜閤錶徵結果錶明,通過化學鍍工藝,在CNTs錶麵均勻連續的鍍覆瞭一層厚度約為20nm的非晶態鎳鍍層,且碳納米管的分散性得到瞭改善,更有利于用于複閤材料領域.原料碳納米管和鍍鎳碳納米管的電磁學性能的對比研究結果錶明,M-CNTs的電導率較CNTs有所降低,這也間接反映瞭鎳鍍層在CNTs錶麵的形成;在4~18GHz內,MCNTs的ε′、ε″、μ"和μ"4箇電磁參數均較CNTs均有所增加.在此基礎上,進一步以M-CNTs為吸波劑,聚氨酯(PU)為粘結劑,製備瞭PU/M-CNTs吸波塗料,對其吸波性能的研究結果錶明,PU/M-CNTs吸波塗料的吸波效果明顯受塗層厚度影響,在1.0~2.0mm的範圍內,隨著塗層厚度的逐漸增大,其吸收峰逐漸嚮低頻移動,且低頻段的吸波效果得以加彊,高頻段的吸波效果有所減弱.
수선대탄납미관( CNTs)진행순화、민화、활화예처리,연후이용화학도방법재기표면침적금속얼이제비출도얼탄납미관(M-CNTs).SEM、TEM、EDS、XRD화DSC등종합표정결과표명,통과화학도공예,재CNTs표면균균련속적도복료일층후도약위20nm적비정태얼도층,차탄납미관적분산성득도료개선,경유리우용우복합재료영역.원료탄납미관화도얼탄납미관적전자학성능적대비연구결과표명,M-CNTs적전도솔교CNTs유소강저,저야간접반영료얼도층재CNTs표면적형성;재4~18GHz내,MCNTs적ε′、ε″、μ"화μ"4개전자삼수균교CNTs균유소증가.재차기출상,진일보이M-CNTs위흡파제,취안지(PU)위점결제,제비료PU/M-CNTs흡파도료,대기흡파성능적연구결과표명,PU/M-CNTs흡파도료적흡파효과명현수도층후도영향,재1.0~2.0mm적범위내,수착도층후도적축점증대,기흡수봉축점향저빈이동,차저빈단적흡파효과득이가강,고빈단적흡파효과유소감약.