北京理工大学学报
北京理工大學學報
북경리공대학학보
JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY
2010年
3期
284-288
,共5页
钱钰博%焦黎%唐东红%孙厚芳%贺晓洋
錢鈺博%焦黎%唐東紅%孫厚芳%賀曉洋
전옥박%초려%당동홍%손후방%하효양
端铣加工%切削力%误差预测%加工变形
耑鐉加工%切削力%誤差預測%加工變形
단선가공%절삭력%오차예측%가공변형
针对复杂结构件端铣加工变形问题,用理论与实验相结合的方法进行端铣加工过程仿真及误差预测.用实验方法对修正的端铣切削力理论模型进行验证,将理论计算与有限元方法相结合,采用加工过程离散与载荷等效的方法将瞬态切削载荷动态施加于工件的有限元模型上,应用热-力耦合分析方法,模拟复杂结构件的端铣加工过程,预测工件被加工表面变形误差.实验及仿真结果验证了所提出的仿真预测方法的可行性与有效性.
針對複雜結構件耑鐉加工變形問題,用理論與實驗相結閤的方法進行耑鐉加工過程倣真及誤差預測.用實驗方法對脩正的耑鐉切削力理論模型進行驗證,將理論計算與有限元方法相結閤,採用加工過程離散與載荷等效的方法將瞬態切削載荷動態施加于工件的有限元模型上,應用熱-力耦閤分析方法,模擬複雜結構件的耑鐉加工過程,預測工件被加工錶麵變形誤差.實驗及倣真結果驗證瞭所提齣的倣真預測方法的可行性與有效性.
침대복잡결구건단선가공변형문제,용이론여실험상결합적방법진행단선가공과정방진급오차예측.용실험방법대수정적단선절삭력이론모형진행험증,장이론계산여유한원방법상결합,채용가공과정리산여재하등효적방법장순태절삭재하동태시가우공건적유한원모형상,응용열-력우합분석방법,모의복잡결구건적단선가공과정,예측공건피가공표면변형오차.실험급방진결과험증료소제출적방진예측방법적가행성여유효성.