中国基层医药
中國基層醫藥
중국기층의약
CHINESE JOURNAL OF PRIMARY MEDICINE AND PHARMACY
2011年
10期
1297-1299,后插3
,共4页
磨牙%全瓷冠%有限元模型
磨牙%全瓷冠%有限元模型
마아%전자관%유한원모형
Molar%All-ceramic crown%Finite element analysis model
目的 建立上颌第一磨牙全瓷冠三维有限元模型.方法 将在体上颁第一磨牙经CT扫描及图像处理后,应用Mimics软件和Imageware软件建立三维几何模型,预备出基牙和全瓷冠各层,然后导入有限元分析软件Abaqus软件中生成实体模型.结果 建立了上颌第一磨牙全瓷冠三维有限元模型,总节点为60160个,4面单元数为186 328个.结论 所构建的模型结构完整,单元划分精细,能够较精确地模拟实体状态,为进一步的生物力学研究提供了基础.
目的 建立上頜第一磨牙全瓷冠三維有限元模型.方法 將在體上頒第一磨牙經CT掃描及圖像處理後,應用Mimics軟件和Imageware軟件建立三維幾何模型,預備齣基牙和全瓷冠各層,然後導入有限元分析軟件Abaqus軟件中生成實體模型.結果 建立瞭上頜第一磨牙全瓷冠三維有限元模型,總節點為60160箇,4麵單元數為186 328箇.結論 所構建的模型結構完整,單元劃分精細,能夠較精確地模擬實體狀態,為進一步的生物力學研究提供瞭基礎.
목적 건립상합제일마아전자관삼유유한원모형.방법 장재체상반제일마아경CT소묘급도상처리후,응용Mimics연건화Imageware연건건립삼유궤하모형,예비출기아화전자관각층,연후도입유한원분석연건Abaqus연건중생성실체모형.결과 건립료상합제일마아전자관삼유유한원모형,총절점위60160개,4면단원수위186 328개.결론 소구건적모형결구완정,단원화분정세,능구교정학지모의실체상태,위진일보적생물역학연구제공료기출.
Objective To reconstruct three-dimensional finite element analysis all-ceramic crowm model of the first maxillary molar.Methods After the CT scanning and image processing to the first maxillary molar in vivo,a 3-D geometric model was established by the Imageware software.The mesh model was then built in Abaqus,the finite element analysis software.Result The three dimensional finite element all-ceramic crown models of the first maxillary molar was constructed on the computer,which had 60 160 nodes and 186 328 tetrahedrons elements.Conclusion The finite element model constructed has the advantages of intact structure and precise elements,can simulate the natural condition and facilitate the further biomechanical research.