中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2012年
3期
315-319
,共5页
郝允志%孙冬野%秦大同%林歆悠
郝允誌%孫鼕野%秦大同%林歆悠
학윤지%손동야%진대동%림흠유
车辆工程%无级变速传动%传动比%夹紧力%耦合
車輛工程%無級變速傳動%傳動比%夾緊力%耦閤
차량공정%무급변속전동%전동비%협긴력%우합
automotive engineering%continuously variable transmission%speed ratio%clamping force%coupling
利用夹紧力与速比之间的耦合作用,在保证传动可靠的前提下,通过联合调节主从动轮油缸压力来干预速比控制,暂时提高系统压力以扩大速比变化率的可控范围。从速比跟踪性能、经济性、动力性、恶劣工况适应性、与夹紧力相关的传动可靠性、与速比变化率相关的舒适性等方面,研究了主动耦合干预控制方法的控制性能。对踏板开度突变工况、超车加速工况、冰雪路面打滑工况和循环工况等工况进行仿真,结果表明:主动耦合干预控制法在保证可靠性、经济性和舒适性的前提下,改善了速比跟踪性能,提高了动力性,增强了在驱动轮打滑等恶劣工况下的适应性,其中目标速比阶跃工况下的速比跟踪误差减小11%~53%,从30km/h加速到60km/h的超车加速时间缩短约0.7s。
利用夾緊力與速比之間的耦閤作用,在保證傳動可靠的前提下,通過聯閤調節主從動輪油缸壓力來榦預速比控製,暫時提高繫統壓力以擴大速比變化率的可控範圍。從速比跟蹤性能、經濟性、動力性、噁劣工況適應性、與夾緊力相關的傳動可靠性、與速比變化率相關的舒適性等方麵,研究瞭主動耦閤榦預控製方法的控製性能。對踏闆開度突變工況、超車加速工況、冰雪路麵打滑工況和循環工況等工況進行倣真,結果錶明:主動耦閤榦預控製法在保證可靠性、經濟性和舒適性的前提下,改善瞭速比跟蹤性能,提高瞭動力性,增彊瞭在驅動輪打滑等噁劣工況下的適應性,其中目標速比階躍工況下的速比跟蹤誤差減小11%~53%,從30km/h加速到60km/h的超車加速時間縮短約0.7s。
이용협긴력여속비지간적우합작용,재보증전동가고적전제하,통과연합조절주종동륜유항압력래간예속비공제,잠시제고계통압력이확대속비변화솔적가공범위。종속비근종성능、경제성、동력성、악렬공황괄응성、여협긴력상관적전동가고성、여속비변화솔상관적서괄성등방면,연구료주동우합간예공제방법적공제성능。대답판개도돌변공황、초차가속공황、빙설로면타활공황화순배공황등공황진행방진,결과표명:주동우합간예공제법재보증가고성、경제성화서괄성적전제하,개선료속비근종성능,제고료동력성,증강료재구동륜타활등악렬공황하적괄응성,기중목표속비계약공황하적속비근종오차감소11%~53%,종30km/h가속도60km/h적초차가속시간축단약0.7s。
Utilizing the coupling effect between clamping force and speed ratio,the shift speed is improved by conditioning the pressure of both primary and second pulleys' hydraulic cylinders.System pressure safety must be ensured to satisfy the clamping force which could meet the requirements of torque transmission.As a result,real ratio tracked the target more rapidly and shift speed range was enlarged.An active coupling control strategy was studied,which included shift speed,clamping force related transmission reliability,fuel economic,dynamic performance,hard condition adaptability,and shift speed related comfortableness.Simulation results show that by adopting active coupling control strategy,reliability,economic,and comfortableness are ensured while ratio tracking performance and power performance are improved.Particularly,ratio tracking error is reduced by 11%~53%,30~60km/h overtaking acceleration time is shortened by 0.7s.