广州化工
廣州化工
엄주화공
GUANGZHOU CHEMICAL INDUSTRY AND TECHNOLOGY
2012年
4期
71-73
,共3页
污水处理站%A/O工艺%调试运行
汙水處理站%A/O工藝%調試運行
오수처리참%A/O공예%조시운행
sewage treatment satation%A/O process%commissioning operation
福建福清市某施工临建区日排水量1500 m3/d,污水处理站设计规模为1500 m3/d,深度处理水量290 m3/d。污水处理站二级处理采用A/O工艺,深度处理采用混凝沉淀——砂滤工艺。本文介绍了工程的特点、设计思路、设计参数及调试运行情况。一年的实际运行表明,污水处理站出水水质良好,达到设计要求。
福建福清市某施工臨建區日排水量1500 m3/d,汙水處理站設計規模為1500 m3/d,深度處理水量290 m3/d。汙水處理站二級處理採用A/O工藝,深度處理採用混凝沉澱——砂濾工藝。本文介紹瞭工程的特點、設計思路、設計參數及調試運行情況。一年的實際運行錶明,汙水處理站齣水水質良好,達到設計要求。
복건복청시모시공림건구일배수량1500 m3/d,오수처리참설계규모위1500 m3/d,심도처리수량290 m3/d。오수처리참이급처리채용A/O공예,심도처리채용혼응침정——사려공예。본문개소료공정적특점、설계사로、설계삼수급조시운행정황。일년적실제운행표명,오수처리참출수수질량호,체도설계요구。
Displacement of a temporary built zone for construction was 1500 m3/d in Fuqing City,Fujian Province,so the designed capacity of sewage treatment station was 1500 m3/d and the depth of treated water was 290m3/d.Secondary treatment of sewage treatment station adopted A/O process,coagulation and sedimentation-sand filtration process was used in the deep process.The characteristics,design ideas,parameters,and the commissioning operation of the project were described.One year of actual operation showed that the effluent water quality of the sewage treatment plant was good,and met the design requirements.
