轮胎工业
輪胎工業
륜태공업
TIRE INDUSTRY
2008年
11期
673-674
,共2页
许庆彬%贾继斌%王金秋%郑春林
許慶彬%賈繼斌%王金鞦%鄭春林
허경빈%가계빈%왕금추%정춘림
工程机械轮胎%结构设计%施工设计
工程機械輪胎%結構設計%施工設計
공정궤계륜태%결구설계%시공설계
介绍12.00-24 16PR光面超加深花纹工程机械轮胎的设计.结构设计:轮胎外直径 1 272 mm,断面宽 296 mm,胎圈着合直径 610 mm,行驶面宽度 286 mm,断面水平轴位置(H1/H2) 0.77,花纹深度 56 mm,周节数 28.施工设计:胎体和缓冲层分别采用1870dtex/2和930dtex/2锦纶66帘布,采用水胎罐式硫化.成品轮胎外缘尺寸和成品物理性能均达到国家标准要求,经济和社会效益良好.
介紹12.00-24 16PR光麵超加深花紋工程機械輪胎的設計.結構設計:輪胎外直徑 1 272 mm,斷麵寬 296 mm,胎圈著閤直徑 610 mm,行駛麵寬度 286 mm,斷麵水平軸位置(H1/H2) 0.77,花紋深度 56 mm,週節數 28.施工設計:胎體和緩遲層分彆採用1870dtex/2和930dtex/2錦綸66簾佈,採用水胎罐式硫化.成品輪胎外緣呎吋和成品物理性能均達到國傢標準要求,經濟和社會效益良好.
개소12.00-24 16PR광면초가심화문공정궤계륜태적설계.결구설계:륜태외직경 1 272 mm,단면관 296 mm,태권착합직경 610 mm,행사면관도 286 mm,단면수평축위치(H1/H2) 0.77,화문심도 56 mm,주절수 28.시공설계:태체화완충층분별채용1870dtex/2화930dtex/2금륜66렴포,채용수태관식류화.성품륜태외연척촌화성품물이성능균체도국가표준요구,경제화사회효익량호.