材料科学与工艺
材料科學與工藝
재료과학여공예
MATERIAL SCIENCE AND TECHNOLOGY
2007年
6期
839-843
,共5页
杨强%袁明康%李明珍%田志军
楊彊%袁明康%李明珍%田誌軍
양강%원명강%리명진%전지군
环氧树脂%钢铅钢粘接件%粘接工艺%优化程度%评价方法
環氧樹脂%鋼鉛鋼粘接件%粘接工藝%優化程度%評價方法
배양수지%강연강점접건%점접공예%우화정도%평개방법
为了改善环氧树脂钢-铅-钢粘接件的粘接可靠性,提高粘接性能,采取一套比较全面的综合评判方法,从粘接强度及其离散性、粘接的胶层粘附率、粘接断面的微观形貌及其表面分析五个角度的综合分析、评价钢-铅-钢环氧树脂粘接件的粘接工艺的优化程度.通过对粘接面的表面处理来改进粘接工艺,将试样的平均粘接强度从原来的4.2 MPa提高到10.9 MPa,同时强度离散性参数从19%下降到3.3%,总体胶层粘附率参数从50%提高到76%~97%,微观形貌下表面粗糙度有所改善,表面分析表明铅合金与环氧树脂胶层结合较为紧密.综合评判方法验证了改进后的粘接工艺具有较高的优化程度,该评价方法对评价粘接工艺是否优化具有较好的效果.
為瞭改善環氧樹脂鋼-鉛-鋼粘接件的粘接可靠性,提高粘接性能,採取一套比較全麵的綜閤評判方法,從粘接彊度及其離散性、粘接的膠層粘附率、粘接斷麵的微觀形貌及其錶麵分析五箇角度的綜閤分析、評價鋼-鉛-鋼環氧樹脂粘接件的粘接工藝的優化程度.通過對粘接麵的錶麵處理來改進粘接工藝,將試樣的平均粘接彊度從原來的4.2 MPa提高到10.9 MPa,同時彊度離散性參數從19%下降到3.3%,總體膠層粘附率參數從50%提高到76%~97%,微觀形貌下錶麵粗糙度有所改善,錶麵分析錶明鉛閤金與環氧樹脂膠層結閤較為緊密.綜閤評判方法驗證瞭改進後的粘接工藝具有較高的優化程度,該評價方法對評價粘接工藝是否優化具有較好的效果.
위료개선배양수지강-연-강점접건적점접가고성,제고점접성능,채취일투비교전면적종합평판방법,종점접강도급기리산성、점접적효층점부솔、점접단면적미관형모급기표면분석오개각도적종합분석、평개강-연-강배양수지점접건적점접공예적우화정도.통과대점접면적표면처리래개진점접공예,장시양적평균점접강도종원래적4.2 MPa제고도10.9 MPa,동시강도리산성삼수종19%하강도3.3%,총체효층점부솔삼수종50%제고도76%~97%,미관형모하표면조조도유소개선,표면분석표명연합금여배양수지효층결합교위긴밀.종합평판방법험증료개진후적점접공예구유교고적우화정도,해평개방법대평개점접공예시부우화구유교호적효과.