强激光与粒子束
彊激光與粒子束
강격광여입자속
HIGH POWER LASER AND PARTICLEBEAMS
2001年
1期
84-88
,共5页
杨希%赵夔%郝建奎%张保澄%谢大林%黄森林
楊希%趙夔%郝建奎%張保澄%謝大林%黃森林
양희%조기%학건규%장보징%사대림%황삼림
耦合器%微波腔%同轴线%波导
耦閤器%微波腔%同軸線%波導
우합기%미파강%동축선%파도
为更进一步提高注入器的性能,注入器使用的耦合器采用同轴对称耦合。给出了同轴对称耦合器的理论计算、具体设计以及实验情况。经过对模型耦合器多次微波传输测量调试以及对各个部位反射的细致分析,最后获得了较好的结果,证明了该耦合器的实用性和可行性。
為更進一步提高註入器的性能,註入器使用的耦閤器採用同軸對稱耦閤。給齣瞭同軸對稱耦閤器的理論計算、具體設計以及實驗情況。經過對模型耦閤器多次微波傳輸測量調試以及對各箇部位反射的細緻分析,最後穫得瞭較好的結果,證明瞭該耦閤器的實用性和可行性。
위경진일보제고주입기적성능,주입기사용적우합기채용동축대칭우합。급출료동축대칭우합기적이론계산、구체설계이급실험정황。경과대모형우합기다차미파전수측량조시이급대각개부위반사적세치분석,최후획득료교호적결과,증명료해우합기적실용성화가행성。
In order to avoid emittance growth due to field asymmetries,asymmetric input coupler is designed. The symmetric coupler is designed as a coaxial input coupler that couples to the cavity on the cavity axis. Asymmetric mode configurations are strongly suppressed since the symmetry of the cavity is not disturbed. In addition the construction of the cooling channels is facilitated since the coupler connects to the gun at an area of low heat deposition. In this paper the design of the parts of coupler is given. The size of the coupler is gained correctly and some experiments have been done. The voltage standing wave ratio of 1.357 is got. The coupler is proved to be practical and feasible.