中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2008年
20期
2419-2422
,共4页
吴红兵%刘刚%毕运波%董辉跃
吳紅兵%劉剛%畢運波%董輝躍
오홍병%류강%필운파%동휘약
钛合金%几何参数%数值模拟%切削加工
鈦閤金%幾何參數%數值模擬%切削加工
태합금%궤하삼수%수치모의%절삭가공
针对钛合金切削过程中刀具易磨损的问题,深入研究了对刀具几何参数对钛合金Ti6A14V切削过程的影响.将正交切削数值模拟与试验相结合,研究了高速切削Ti6A14V过程中刀具几何参数(前角、后角、刀尖圆弧半径)对切削力的影响规律,同时,也研究了刀具几何参数对锯齿状切屑形成的影响规律.
針對鈦閤金切削過程中刀具易磨損的問題,深入研究瞭對刀具幾何參數對鈦閤金Ti6A14V切削過程的影響.將正交切削數值模擬與試驗相結閤,研究瞭高速切削Ti6A14V過程中刀具幾何參數(前角、後角、刀尖圓弧半徑)對切削力的影響規律,同時,也研究瞭刀具幾何參數對鋸齒狀切屑形成的影響規律.
침대태합금절삭과정중도구역마손적문제,심입연구료대도구궤하삼수대태합금Ti6A14V절삭과정적영향.장정교절삭수치모의여시험상결합,연구료고속절삭Ti6A14V과정중도구궤하삼수(전각、후각、도첨원호반경)대절삭력적영향규률,동시,야연구료도구궤하삼수대거치상절설형성적영향규률.