中国组织工程研究与临床康复
中國組織工程研究與臨床康複
중국조직공정연구여림상강복
JOURNAL OF CLINICAL REHABILITATIVE TISSUE ENGINEERING RESEARCH
2011年
22期
4165-4170
,共6页
邓红震%张银网%朱海波%朱建民%汤杰%顾文骏%朱亦
鄧紅震%張銀網%硃海波%硃建民%湯傑%顧文駿%硃亦
산홍진%장은망%주해파%주건민%탕걸%고문준%주역
上胫腓关节%坡度%测量%X射线平片%64排螺旋CT
上脛腓關節%坡度%測量%X射線平片%64排螺鏇CT
상경비관절%파도%측량%X사선평편%64배라선CT
背景:测量上胫腓关节坡度不仅可研究国人上胫腓关节解剖结构与类型,还具有评价上胫腓关节稳定性的作用.目的:通过测量双侧上胫腓关节面X射线平片坡度与利用64排螺旋CT重建后的关节面坡度进行比较,探讨测量方法的优良及关节坡度的临床意义.方法:选取正常成年男女各50名志愿者,年龄18~90岁,分别行双膝关节内旋30°或45°或60°摄片及64排螺旋CT扫描并重建胫腓骨全长(包括膝关节).选用角尺测量上胫腓关节面与腓骨干纵轴的夹角和上胫腓骨关节面与水平线的夹角.结果与结论:X射线及螺旋CT对同一上胫腓骨关节测量数据差别较大.由于X线受摄片位置影响,且关节面倾斜度的确定比较粗略,因此64排螺旋CT重建后的测量方法准确,方便,对于鉴别上胫腓骨关节脱位和关节不稳提供帮助,减少临床误诊.
揹景:測量上脛腓關節坡度不僅可研究國人上脛腓關節解剖結構與類型,還具有評價上脛腓關節穩定性的作用.目的:通過測量雙側上脛腓關節麵X射線平片坡度與利用64排螺鏇CT重建後的關節麵坡度進行比較,探討測量方法的優良及關節坡度的臨床意義.方法:選取正常成年男女各50名誌願者,年齡18~90歲,分彆行雙膝關節內鏇30°或45°或60°攝片及64排螺鏇CT掃描併重建脛腓骨全長(包括膝關節).選用角呎測量上脛腓關節麵與腓骨榦縱軸的夾角和上脛腓骨關節麵與水平線的夾角.結果與結論:X射線及螺鏇CT對同一上脛腓骨關節測量數據差彆較大.由于X線受攝片位置影響,且關節麵傾斜度的確定比較粗略,因此64排螺鏇CT重建後的測量方法準確,方便,對于鑒彆上脛腓骨關節脫位和關節不穩提供幫助,減少臨床誤診.
배경:측량상경비관절파도불부가연구국인상경비관절해부결구여류형,환구유평개상경비관절은정성적작용.목적:통과측량쌍측상경비관절면X사선평편파도여이용64배라선CT중건후적관절면파도진행비교,탐토측량방법적우량급관절파도적림상의의.방법:선취정상성년남녀각50명지원자,년령18~90세,분별행쌍슬관절내선30°혹45°혹60°섭편급64배라선CT소묘병중건경비골전장(포괄슬관절).선용각척측량상경비관절면여비골간종축적협각화상경비골관절면여수평선적협각.결과여결론:X사선급라선CT대동일상경비골관절측량수거차별교대.유우X선수섭편위치영향,차관절면경사도적학정비교조략,인차64배라선CT중건후적측량방법준학,방편,대우감별상경비골관절탈위화관절불은제공방조,감소림상오진.
BACKGROUND: Measuring the slope of proximal tibiofibular joint may elucidate the anatomical structure and type of proximal tibiofibular joint, and evaluate the stability of proximal tibiofibular joint. OBJECTIVE: To investigate the measurement methods and clinical significance of the joint slope by comparing the slope measurement of bilateral proximal tibiofibular joint surface on X-ray and 64-row spiral CT reconstruction.METHODS: One hundred normal adult volunteers, including 50 males and 50 females, aged 18-90 years, were photographed in double knees via internal rotation to 30°, 45° and 60°, respectively and scanned with 64-row spiral CT, tibiofibular bone (including knee joints) was reconstructed. The included angle between proximal tibiofibular articular surface and the longitudinal axis of the fibula shaft, between the proximal tibiofibular articular surface and the horizontal line, were measured using an angle square.RESULTS AND CONCLUSION: There were great variations of the data in the same proximal tibiofibular joint measured by X-ray and spiral CT. X-ray results are affected by the site of photograph position, and the slope of articular surface is estimated, so the 64-row spiral CT is an accurate and convenient method to reconstitute the slope of proximal tibiofibular joints. Spiral CT could be used to distinguish the dislocation and instability of the proximal tibiofibular joint, accordingly reduce the clinical misdiagnosis.