大连工业大学学报
大連工業大學學報
대련공업대학학보
JOURNAL OF DALIAN POLYTECHNIC UNIVERSITY
2008年
3期
274-277
,共4页
张波%张伟%张占阳%佟娟
張波%張偉%張佔暘%佟娟
장파%장위%장점양%동연
枪钻%排屑%外缘转角
鎗鑽%排屑%外緣轉角
창찬%배설%외연전각
枪钻在加工42CrMo深孔时存在的主要问题有:排屑不通畅、快速磨损.经分析实际加工条件和被加工材料的特征后,修改了原有钻尖的几何参数.经过一系列实验证明:改进后的枪钻寿命提高了2倍多,提高了加工效率.介绍了所改进的钻型、实验过程和结果,并初步分析了排屑机理.
鎗鑽在加工42CrMo深孔時存在的主要問題有:排屑不通暢、快速磨損.經分析實際加工條件和被加工材料的特徵後,脩改瞭原有鑽尖的幾何參數.經過一繫列實驗證明:改進後的鎗鑽壽命提高瞭2倍多,提高瞭加工效率.介紹瞭所改進的鑽型、實驗過程和結果,併初步分析瞭排屑機理.
창찬재가공42CrMo심공시존재적주요문제유:배설불통창、쾌속마손.경분석실제가공조건화피가공재료적특정후,수개료원유찬첨적궤하삼수.경과일계렬실험증명:개진후적창찬수명제고료2배다,제고료가공효솔.개소료소개진적찬형、실험과정화결과,병초보분석료배설궤리.