燃气涡轮试验与研究
燃氣渦輪試驗與研究
연기와륜시험여연구
GAS TURBINE EXPERIMENT AND RESEARCH
2008年
2期
15-18,47
,共5页
王掩刚%程荣辉%兰发祥%刘波
王掩剛%程榮輝%蘭髮祥%劉波
왕엄강%정영휘%란발상%류파
附面层%激波%抽吸流%分离
附麵層%激波%抽吸流%分離
부면층%격파%추흡류%분리
以某高负荷静子叶栅为研究对象,应用数值模拟方法分析了其在不同工况下附面层拓扑结构特点,针对该分离现象实施附面层抽吸,分析了激波与附面层相干过程,探讨了抽吸流与槽道激波的相干作用.结果表明:(1)在有激波、无抽吸条件下,附面层发展一般会经历分离泡产生、破碎、附着叶片表面的过程之后进入大分离状态;(2)吸力面开孔进行附面层抽吸,在一定程度上可以提高静压比,同时损失变化不大;(3)在激波后实施附面层抽吸,会使激波向下游漂移,其后附面层分离更为严重,因此在槽道存在激波时,若实施附面层抽吸,应该预先考虑抽吸气流与激波的相互干涉作用.
以某高負荷靜子葉柵為研究對象,應用數值模擬方法分析瞭其在不同工況下附麵層拓撲結構特點,針對該分離現象實施附麵層抽吸,分析瞭激波與附麵層相榦過程,探討瞭抽吸流與槽道激波的相榦作用.結果錶明:(1)在有激波、無抽吸條件下,附麵層髮展一般會經歷分離泡產生、破碎、附著葉片錶麵的過程之後進入大分離狀態;(2)吸力麵開孔進行附麵層抽吸,在一定程度上可以提高靜壓比,同時損失變化不大;(3)在激波後實施附麵層抽吸,會使激波嚮下遊漂移,其後附麵層分離更為嚴重,因此在槽道存在激波時,若實施附麵層抽吸,應該預先攷慮抽吸氣流與激波的相互榦涉作用.
이모고부하정자협책위연구대상,응용수치모의방법분석료기재불동공황하부면층탁복결구특점,침대해분리현상실시부면층추흡,분석료격파여부면층상간과정,탐토료추흡류여조도격파적상간작용.결과표명:(1)재유격파、무추흡조건하,부면층발전일반회경력분리포산생、파쇄、부착협편표면적과정지후진입대분리상태;(2)흡력면개공진행부면층추흡,재일정정도상가이제고정압비,동시손실변화불대;(3)재격파후실시부면층추흡,회사격파향하유표이,기후부면층분리경위엄중,인차재조도존재격파시,약실시부면층추흡,응해예선고필추흡기류여격파적상호간섭작용.