中国有色金属学报
中國有色金屬學報
중국유색금속학보
THE CHINESE JOURNAL OF NONFERROUS METALS
2010年
6期
1083-1087
,共5页
杜刚%杨文%闫德胜%戎利建
杜剛%楊文%閆德勝%戎利建
두강%양문%염덕성%융리건
铝合金%Al-Mg-Sc-Zr合金%初生相%冷却速率%显微组织
鋁閤金%Al-Mg-Sc-Zr閤金%初生相%冷卻速率%顯微組織
려합금%Al-Mg-Sc-Zr합금%초생상%냉각속솔%현미조직
利用扫描电子显微镜(SEM)和电子探针(EPMA)研究液态金属的冷却速率对Al-6Mg-0.2Sc-0.15Zr(质量分数,%)合金中初生相的结构、形貌及成分的影响.结果表明:在较低的冷却速率下(随炉冷却),液态金属中析出的初生相为L12结构的Al3(Sc, Zr)相和D023结构的Al3(Zr, Sc)相.初生Al3(Sc, Zr)相为Zr溶解在Al3Sc相中的固溶体,具有复杂的形貌和较高的体积分数;当冷却速率较大时(钢模具冷却),D023结构的Al3(Zr, Sc)相的析出受到抑制而形成L12结构的Al3(Sc, Zr)相或亚稳态的Al3(Zr, Sc)相;当冷却速率足够大时(铜模具冷却),α(Al)基体在较高的过冷度下快速结晶,初生相的形成完全受到抑制.
利用掃描電子顯微鏡(SEM)和電子探針(EPMA)研究液態金屬的冷卻速率對Al-6Mg-0.2Sc-0.15Zr(質量分數,%)閤金中初生相的結構、形貌及成分的影響.結果錶明:在較低的冷卻速率下(隨爐冷卻),液態金屬中析齣的初生相為L12結構的Al3(Sc, Zr)相和D023結構的Al3(Zr, Sc)相.初生Al3(Sc, Zr)相為Zr溶解在Al3Sc相中的固溶體,具有複雜的形貌和較高的體積分數;噹冷卻速率較大時(鋼模具冷卻),D023結構的Al3(Zr, Sc)相的析齣受到抑製而形成L12結構的Al3(Sc, Zr)相或亞穩態的Al3(Zr, Sc)相;噹冷卻速率足夠大時(銅模具冷卻),α(Al)基體在較高的過冷度下快速結晶,初生相的形成完全受到抑製.
이용소묘전자현미경(SEM)화전자탐침(EPMA)연구액태금속적냉각속솔대Al-6Mg-0.2Sc-0.15Zr(질량분수,%)합금중초생상적결구、형모급성분적영향.결과표명:재교저적냉각속솔하(수로냉각),액태금속중석출적초생상위L12결구적Al3(Sc, Zr)상화D023결구적Al3(Zr, Sc)상.초생Al3(Sc, Zr)상위Zr용해재Al3Sc상중적고용체,구유복잡적형모화교고적체적분수;당냉각속솔교대시(강모구냉각),D023결구적Al3(Zr, Sc)상적석출수도억제이형성L12결구적Al3(Sc, Zr)상혹아은태적Al3(Zr, Sc)상;당냉각속솔족구대시(동모구냉각),α(Al)기체재교고적과랭도하쾌속결정,초생상적형성완전수도억제.