重庆大学学报(自然科学版)
重慶大學學報(自然科學版)
중경대학학보(자연과학판)
JOURNAL OF CHONGQING UNIVERSITY(NATURAL SCIENCE EDITION)
2007年
3期
6-10
,共5页
陆冬%汤宝平%何启源%魏玉果
陸鼕%湯寶平%何啟源%魏玉果
륙동%탕보평%하계원%위옥과
模态参数识别%频响函数%最小二乘法%精度
模態參數識彆%頻響函數%最小二乘法%精度
모태삼수식별%빈향함수%최소이승법%정도
模态参数识别的精度将会直接影响到机械结构系统动力特性分析的质量,而频响函数的估计精度对模态参数识别精度影响很大.工程中通常借助FFT采用功率谱平均估计频响函数.由于FFT过程中截断及舍入等误差的存在以及噪声的影响不能完全克服,采用此方法估计的频响函数来识别模态参数,其精度受到影响.因此,在分析频响函数的理论值与功率谱平均估计值的误差函数的基础上,应用最小二乘法对频响函数的估计进行优化.通过实测试验对该方法的有效性进行了验证.试验结果表明:采用优化后的频响函数识别的阻尼固有频率和阻尼比比没有优化直接峰值搜索得到的结果更接近真实的结果,该方法能够提高模态参数识别的精度.
模態參數識彆的精度將會直接影響到機械結構繫統動力特性分析的質量,而頻響函數的估計精度對模態參數識彆精度影響很大.工程中通常藉助FFT採用功率譜平均估計頻響函數.由于FFT過程中截斷及捨入等誤差的存在以及譟聲的影響不能完全剋服,採用此方法估計的頻響函數來識彆模態參數,其精度受到影響.因此,在分析頻響函數的理論值與功率譜平均估計值的誤差函數的基礎上,應用最小二乘法對頻響函數的估計進行優化.通過實測試驗對該方法的有效性進行瞭驗證.試驗結果錶明:採用優化後的頻響函數識彆的阻尼固有頻率和阻尼比比沒有優化直接峰值搜索得到的結果更接近真實的結果,該方法能夠提高模態參數識彆的精度.
모태삼수식별적정도장회직접영향도궤계결구계통동력특성분석적질량,이빈향함수적고계정도대모태삼수식별정도영향흔대.공정중통상차조FFT채용공솔보평균고계빈향함수.유우FFT과정중절단급사입등오차적존재이급조성적영향불능완전극복,채용차방법고계적빈향함수래식별모태삼수,기정도수도영향.인차,재분석빈향함수적이론치여공솔보평균고계치적오차함수적기출상,응용최소이승법대빈향함수적고계진행우화.통과실측시험대해방법적유효성진행료험증.시험결과표명:채용우화후적빈향함수식별적조니고유빈솔화조니비비몰유우화직접봉치수색득도적결과경접근진실적결과,해방법능구제고모태삼수식별적정도.