传感技术学报
傳感技術學報
전감기술학보
Journal of Transduction Technology
2010年
4期
501-507
,共7页
董林玺%李寿洛%陈金丹%颜海霞%许立%王光义%孙玲玲
董林璽%李壽洛%陳金丹%顏海霞%許立%王光義%孫玲玲
동림새%리수락%진금단%안해하%허립%왕광의%손령령
MEMS%微电容式惯性传感器%检测电容结构
MEMS%微電容式慣性傳感器%檢測電容結構
MEMS%미전용식관성전감기%검측전용결구
MEMS%Micro capacitive inertial sensor%Structure of detecting capacitance
改进传感器检测电容几何结构能有效改善传感器的性能.本文对梳齿电极结构、栅形电极结构及梳栅电极结构检测电容的性能特点进行分析比较,重点分析了振子质量、空气阻尼、系统阻尼系数比以及灵敏度等特性,得出在相同的外轮廓尺寸、支撑梁、振子厚度以及振子到衬底的距离的条件下,栅形结构传感器的振子质量最大,空气阻尼最小,适合制作高分辨率的传感器;在大气下,梳齿结构灵敏度增加的同时空气阻尼力也会增加,且振子质量较小,适合制作高灵敏度,低分辨率传感器结构;梳栅结构的特点居于两者之间,适合制作需要兼顾分辨率和灵敏度的传感器.通过实例计算,证明了该结果.
改進傳感器檢測電容幾何結構能有效改善傳感器的性能.本文對梳齒電極結構、柵形電極結構及梳柵電極結構檢測電容的性能特點進行分析比較,重點分析瞭振子質量、空氣阻尼、繫統阻尼繫數比以及靈敏度等特性,得齣在相同的外輪廓呎吋、支撐樑、振子厚度以及振子到襯底的距離的條件下,柵形結構傳感器的振子質量最大,空氣阻尼最小,適閤製作高分辨率的傳感器;在大氣下,梳齒結構靈敏度增加的同時空氣阻尼力也會增加,且振子質量較小,適閤製作高靈敏度,低分辨率傳感器結構;梳柵結構的特點居于兩者之間,適閤製作需要兼顧分辨率和靈敏度的傳感器.通過實例計算,證明瞭該結果.
개진전감기검측전용궤하결구능유효개선전감기적성능.본문대소치전겁결구、책형전겁결구급소책전겁결구검측전용적성능특점진행분석비교,중점분석료진자질량、공기조니、계통조니계수비이급령민도등특성,득출재상동적외륜곽척촌、지탱량、진자후도이급진자도츤저적거리적조건하,책형결구전감기적진자질량최대,공기조니최소,괄합제작고분변솔적전감기;재대기하,소치결구령민도증가적동시공기조니력야회증가,차진자질량교소,괄합제작고령민도,저분변솔전감기결구;소책결구적특점거우량자지간,괄합제작수요겸고분변솔화령민도적전감기.통과실례계산,증명료해결과.
Optimizing the structure of a sensing capacitance can improve the performances of MEMS accelerometer. The characteristics of MEMS capacitive accelerometers with comb, bar and comb-bar capacitances, respectively, have been analyzed. The proof mass, air damping and damping ratio of the three different sensor structures are compared on the condition of same dimension, elastic constant of the spring, thickness of the proof mass, distance between the proof mass and the substrate. The results show that the proof mass of bar capacitance sensor is largest, and its air damping is least, which is suitable for high-precise sensor. The sensitivity of comb capacitance sensor in air is increased while the air damping is increased too, so it is suitable for high-sensitivity and low-precise sensor. The comb-bar capacitance is suitable for the sensors which need both high sensitivity and precision. An example is taken to prove the results.