木材加工机械
木材加工機械
목재가공궤계
WOOD PROCESSING MACHINERY
2011年
4期
6-9
,共4页
木粉%PVC%木塑复合材%丙烯酸酯胶粘剂%环氧树脂胶黏剂%拉伸剪切强度
木粉%PVC%木塑複閤材%丙烯痠酯膠粘劑%環氧樹脂膠黏劑%拉伸剪切彊度
목분%PVC%목소복합재%병희산지효점제%배양수지효점제%랍신전절강도
wood power%PVC%wood-plastic composites%acrylic adhesive%epoxy adhesive%tensile shear strength
参照国家标准GB/T 7124-2008《胶粘剂拉伸剪切强度的测定(刚性材料对刚性材料)》检测PVC/木粉复合材料胶合试件的拉伸剪切强度,发现:PVC/木粉复合材料胶合试件的断裂均发生在粘接区域外的复合材料本身,因而无法比较胶黏剂的粘接强度。为了能比较胶黏剂胶接接头的粘接强度,实验中将GB/T 7124-2008中规定的试件的厚度从1.6 mm加大至4mm。实验结果表明:采用环氧树脂粘接的PVC/木粉复合材料的拉伸剪切强度值高于用J-39丙烯酸酯胶黏剂粘接的复合材料的拉伸剪切强度。
參照國傢標準GB/T 7124-2008《膠粘劑拉伸剪切彊度的測定(剛性材料對剛性材料)》檢測PVC/木粉複閤材料膠閤試件的拉伸剪切彊度,髮現:PVC/木粉複閤材料膠閤試件的斷裂均髮生在粘接區域外的複閤材料本身,因而無法比較膠黏劑的粘接彊度。為瞭能比較膠黏劑膠接接頭的粘接彊度,實驗中將GB/T 7124-2008中規定的試件的厚度從1.6 mm加大至4mm。實驗結果錶明:採用環氧樹脂粘接的PVC/木粉複閤材料的拉伸剪切彊度值高于用J-39丙烯痠酯膠黏劑粘接的複閤材料的拉伸剪切彊度。
삼조국가표준GB/T 7124-2008《효점제랍신전절강도적측정(강성재료대강성재료)》검측PVC/목분복합재료효합시건적랍신전절강도,발현:PVC/목분복합재료효합시건적단렬균발생재점접구역외적복합재료본신,인이무법비교효점제적점접강도。위료능비교효점제효접접두적점접강도,실험중장GB/T 7124-2008중규정적시건적후도종1.6 mm가대지4mm。실험결과표명:채용배양수지점접적PVC/목분복합재료적랍신전절강도치고우용J-39병희산지효점제점접적복합재료적랍신전절강도。
In this paper,the tensile shear strengths of PVC wood-plastic composites with two adhesives were tested according to Chinese standard GB / T 7124-2008(Adhesives-Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies).It was found that glue-blocks bonded with epoxy adhesive and J-39 Acrylic adhesive were broken all at the bonding materials itself outside the bonding region,leading to bonding strength not being compared between two adhesives.In order to compare bonding strength of glued joints with two adhesives,the thickness of specimen consisted of glued joints will be increased to 4 mm from 1.6 mm.The results showed that tensile shear strength of PVC wood-plastic composites glued joints with epoxy adhesive is higher than that of acrylic adhesive.