焊接
銲接
한접
WELDING & JOINING
2008年
9期
53-56
,共4页
万荣涛%杨弘生%赵卫忠%肖璇
萬榮濤%楊弘生%趙衛忠%肖璇
만영도%양홍생%조위충%초선
舍利塔%十字型钢柱%钢结构%焊接%端铣
捨利塔%十字型鋼柱%鋼結構%銲接%耑鐉
사리탑%십자형강주%강결구%한접%단선
法门寺合十舍利塔的合十建筑造型完全采用钢结构来表现,构件加工精度要求高,技术难度大.结合工程实践,提出了其钢结构重要组成部分--重型十字型钢柱的焊接制作方法.十字型钢柱由H型钢和两块T型钢组合构成,H型钢在船型胎架上进行组装;两块T型钢采用工艺桥搭接法形成一个新的工艺焊接H型钢进行组装焊接.组合后的十字型钢柱的组装在专用加工平台上进行,制定了十字型钢柱在组装焊接时采取的关键技术措施和焊接工艺参数.焊接组装完成后对十字型钢柱进行端铣加工.合理的焊接顺序和工艺措施保证了良好的施工效果.
法門寺閤十捨利塔的閤十建築造型完全採用鋼結構來錶現,構件加工精度要求高,技術難度大.結閤工程實踐,提齣瞭其鋼結構重要組成部分--重型十字型鋼柱的銲接製作方法.十字型鋼柱由H型鋼和兩塊T型鋼組閤構成,H型鋼在船型胎架上進行組裝;兩塊T型鋼採用工藝橋搭接法形成一箇新的工藝銲接H型鋼進行組裝銲接.組閤後的十字型鋼柱的組裝在專用加工平檯上進行,製定瞭十字型鋼柱在組裝銲接時採取的關鍵技術措施和銲接工藝參數.銲接組裝完成後對十字型鋼柱進行耑鐉加工.閤理的銲接順序和工藝措施保證瞭良好的施工效果.
법문사합십사리탑적합십건축조형완전채용강결구래표현,구건가공정도요구고,기술난도대.결합공정실천,제출료기강결구중요조성부분--중형십자형강주적한접제작방법.십자형강주유H형강화량괴T형강조합구성,H형강재선형태가상진행조장;량괴T형강채용공예교탑접법형성일개신적공예한접H형강진행조장한접.조합후적십자형강주적조장재전용가공평태상진행,제정료십자형강주재조장한접시채취적관건기술조시화한접공예삼수.한접조장완성후대십자형강주진행단선가공.합리적한접순서화공예조시보증료량호적시공효과.