热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2010年
16期
75-77
,共3页
焦安源%王凤辉%杨似琼%高兴岐
焦安源%王鳳輝%楊似瓊%高興岐
초안원%왕봉휘%양사경%고흥기
重力分离SHS法%陶瓷涂层%复合钢板
重力分離SHS法%陶瓷塗層%複閤鋼闆
중력분리SHS법%도자도층%복합강판
利用重力分离SHS技术在带卷边钢板表面直接制备了陶瓷复合涂层.测量了涂层厚度和硬度,分析了钢基体与氧化铝陶瓷结合力产生的原因,确定了二者的结合方式及卷边钢板的工艺尺寸参数,检测了涂层与基体法向和切向结合强度.结果表明,陶瓷复合钢板的涂层表面光滑,其硬度在1100HV以上;钢基体与陶瓷涂层主要是机械嵌合.
利用重力分離SHS技術在帶捲邊鋼闆錶麵直接製備瞭陶瓷複閤塗層.測量瞭塗層厚度和硬度,分析瞭鋼基體與氧化鋁陶瓷結閤力產生的原因,確定瞭二者的結閤方式及捲邊鋼闆的工藝呎吋參數,檢測瞭塗層與基體法嚮和切嚮結閤彊度.結果錶明,陶瓷複閤鋼闆的塗層錶麵光滑,其硬度在1100HV以上;鋼基體與陶瓷塗層主要是機械嵌閤.
이용중력분리SHS기술재대권변강판표면직접제비료도자복합도층.측량료도층후도화경도,분석료강기체여양화려도자결합력산생적원인,학정료이자적결합방식급권변강판적공예척촌삼수,검측료도층여기체법향화절향결합강도.결과표명,도자복합강판적도층표면광활,기경도재1100HV이상;강기체여도자도층주요시궤계감합.