中国有色金属学会会刊(英文版)
中國有色金屬學會會刊(英文版)
중국유색금속학회회간(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2003年
4期
876-880
,共5页
刘凤尧%杨春利%林三宝%吴林%苏生
劉鳳堯%楊春利%林三寶%吳林%囌生
류봉요%양춘리%림삼보%오림%소생
TIG welding%activating flux%penetration%microstructure%mechanical property
Conventional TIG welding is known as its low productivity and limited weld depth in a single pass. Activating TIG welding (A-TIG) can greatly improve the penetration when compared with the conventional TIG welding. The effects of five kinds of activating fluxes with single component (NaF, CaF2, AlF3, NaCl or CaCl2) on penetration, microstructure and weld mechanical properties during the TIG welding of titanium alloy Ti-6Al-4V were studied. Compared with the conventional TIG welding, the experimental results show that the fluxes can greatly improve the penetration at the same welding specifications. This is because of the constriction of anode spots and the change of surface tension grads. Among them the effect of flux NaF is the best in the weld tensile strength, and the effect of flux CaF2 on the weld bend intension is the best. The appearance of inferior crystal grains and the structure of trident crystal grains are the main reasons that the performance of weld with fluoride is improved. These experimental results can be used as an aid for selecting suitable activating flux for titanium alloy.