矿业工程研究
礦業工程研究
광업공정연구
MINERAL ENGINEEERING RESEACH
2011年
2期
57-60
,共4页
程正梅%郭小定%陈晓可%邓景新
程正梅%郭小定%陳曉可%鄧景新
정정매%곽소정%진효가%산경신
MATLAB/Simulink%S函数%小机车%稳压%响应
MATLAB/Simulink%S函數%小機車%穩壓%響應
MATLAB/Simulink%S함수%소궤차%은압%향응
矿用小机车传统试验电源在实际应用中存在2大问题:小机车工作面与稳压电源之间线路长,产生传输电阻较大,故功耗大,造成电源稳定性差;另外由于直流电压通过电动调压器和交流电机调节,响应速度慢;新型试验电源采用高频开关IGBT结合电容充放电的作用,能够解决以上存在的问题.主要讨论运用MATLAB的Simulink并结合S函数针对新型试验电源电路进行仿真,论证新型电源的可行性.仿真可以得出:新型试验电源的稳压效果显著,响应速度快.
礦用小機車傳統試驗電源在實際應用中存在2大問題:小機車工作麵與穩壓電源之間線路長,產生傳輸電阻較大,故功耗大,造成電源穩定性差;另外由于直流電壓通過電動調壓器和交流電機調節,響應速度慢;新型試驗電源採用高頻開關IGBT結閤電容充放電的作用,能夠解決以上存在的問題.主要討論運用MATLAB的Simulink併結閤S函數針對新型試驗電源電路進行倣真,論證新型電源的可行性.倣真可以得齣:新型試驗電源的穩壓效果顯著,響應速度快.
광용소궤차전통시험전원재실제응용중존재2대문제:소궤차공작면여은압전원지간선로장,산생전수전조교대,고공모대,조성전원은정성차;령외유우직류전압통과전동조압기화교류전궤조절,향응속도만;신형시험전원채용고빈개관IGBT결합전용충방전적작용,능구해결이상존재적문제.주요토론운용MATLAB적Simulink병결합S함수침대신형시험전원전로진행방진,론증신형전원적가행성.방진가이득출:신형시험전원적은압효과현저,향응속도쾌.