高校化学工程学报
高校化學工程學報
고교화학공정학보
JOURNAL OF CHEMICAL ENGINEERING OF CHINESE UNIVERSITIES
2003年
5期
486-491
,共6页
袁才登%缪爱花%王艳君%曹同玉
袁纔登%繆愛花%王豔君%曹同玉
원재등%무애화%왕염군%조동옥
乳液聚合%Monte Carlo方法%数学模型%计算机模拟
乳液聚閤%Monte Carlo方法%數學模型%計算機模擬
유액취합%Monte Carlo방법%수학모형%계산궤모의
建立了乳液聚合成核阶段的Monte Carlo模型,并用计算机对一个体积为10(17m3的微型反应器中苯乙烯的乳液聚合进行了模拟.以计算机生成随机数作为自由基被胶束和乳胶粒捕获的几率,模拟了在微型反应器中每一个自由基的生成、被胶束或乳胶粒捕获的过程以及每一个乳胶粒的生成及增长过程.通过对每一个乳胶粒在增长过程中各参数的统计计算,研究了乳液聚合成核阶段诸参数(乳胶粒数目、乳胶粒直径与粒径分布、单体转化率、聚合反应速率等)与乳化剂浓度[S]及引发剂浓度[I]的关系.结果表明,苯乙烯的乳液聚合体系中乳胶粒数目与[S]0.5996[I]0.4016成正比;在成核阶段乳胶粒直径分布先变宽后变窄,乳液聚合过程中乳胶粒直径分布有自动变窄的趋势;成核阶段持续时间t12与[S]0.60[I]-0.60成正比,成核阶段结束时的单体转化率x12与[S]1.20[I]-0.20成正比.
建立瞭乳液聚閤成覈階段的Monte Carlo模型,併用計算機對一箇體積為10(17m3的微型反應器中苯乙烯的乳液聚閤進行瞭模擬.以計算機生成隨機數作為自由基被膠束和乳膠粒捕穫的幾率,模擬瞭在微型反應器中每一箇自由基的生成、被膠束或乳膠粒捕穫的過程以及每一箇乳膠粒的生成及增長過程.通過對每一箇乳膠粒在增長過程中各參數的統計計算,研究瞭乳液聚閤成覈階段諸參數(乳膠粒數目、乳膠粒直徑與粒徑分佈、單體轉化率、聚閤反應速率等)與乳化劑濃度[S]及引髮劑濃度[I]的關繫.結果錶明,苯乙烯的乳液聚閤體繫中乳膠粒數目與[S]0.5996[I]0.4016成正比;在成覈階段乳膠粒直徑分佈先變寬後變窄,乳液聚閤過程中乳膠粒直徑分佈有自動變窄的趨勢;成覈階段持續時間t12與[S]0.60[I]-0.60成正比,成覈階段結束時的單體轉化率x12與[S]1.20[I]-0.20成正比.
건립료유액취합성핵계단적Monte Carlo모형,병용계산궤대일개체적위10(17m3적미형반응기중분을희적유액취합진행료모의.이계산궤생성수궤수작위자유기피효속화유효립포획적궤솔,모의료재미형반응기중매일개자유기적생성、피효속혹유효립포획적과정이급매일개유효립적생성급증장과정.통과대매일개유효립재증장과정중각삼수적통계계산,연구료유액취합성핵계단제삼수(유효립수목、유효립직경여립경분포、단체전화솔、취합반응속솔등)여유화제농도[S]급인발제농도[I]적관계.결과표명,분을희적유액취합체계중유효립수목여[S]0.5996[I]0.4016성정비;재성핵계단유효립직경분포선변관후변착,유액취합과정중유효립직경분포유자동변착적추세;성핵계단지속시간t12여[S]0.60[I]-0.60성정비,성핵계단결속시적단체전화솔x12여[S]1.20[I]-0.20성정비.