中国组织工程研究与临床康复
中國組織工程研究與臨床康複
중국조직공정연구여림상강복
JOURNAL OF CLINICAL REHABILITATIVE TISSUE ENGINEERING RESEARCH
2010年
12期
2167-2170
,共4页
亓莉莉%聂二民%陈霞云%黄颖荷%刘伟%张春元
亓莉莉%聶二民%陳霞雲%黃穎荷%劉偉%張春元
기리리%섭이민%진하운%황영하%류위%장춘원
疲劳抗性%石英纤维桩%复合树脂核%循环加载%口腔生物材料
疲勞抗性%石英纖維樁%複閤樹脂覈%循環加載%口腔生物材料
피로항성%석영섬유장%복합수지핵%순배가재%구강생물재료
背景:研究表明口腔的日常咀嚼功能会对纤维桩核修复体的抗折性能产生影响.目的:评价石英纤维桩复合树脂核全冠修复的下颌前磨牙的疲劳抗性.方法:将正畸拔除的44颗单根前磨牙分为实验组和对照组,每组22颗,离体牙行石英纤维桩复合树脂核金属烤瓷冠修复,实验组行频率为6 Hz、次数为120万次的45°循环加载,对照组不进行循环加载,然后两组分别行速率为1 mm,min的45°侧向加载.记录牙根出现折裂时的破坏力值、牙根的折裂模式以及桩核脱位情况.结果与结论:实验组和对照组的抗荷载力均值分别为(733.88±254.99)N和(869.14±280-26)N,两组之间差异无显著性意义(P>0.05).实验组有1例垂直根折,其余均为可修复性根折,两组未见桩核脱位现象.说明石英纤维复合树脂桩核系统修复后的离体牙整体疲劳抗性优异.
揹景:研究錶明口腔的日常咀嚼功能會對纖維樁覈脩複體的抗摺性能產生影響.目的:評價石英纖維樁複閤樹脂覈全冠脩複的下頜前磨牙的疲勞抗性.方法:將正畸拔除的44顆單根前磨牙分為實驗組和對照組,每組22顆,離體牙行石英纖維樁複閤樹脂覈金屬烤瓷冠脩複,實驗組行頻率為6 Hz、次數為120萬次的45°循環加載,對照組不進行循環加載,然後兩組分彆行速率為1 mm,min的45°側嚮加載.記錄牙根齣現摺裂時的破壞力值、牙根的摺裂模式以及樁覈脫位情況.結果與結論:實驗組和對照組的抗荷載力均值分彆為(733.88±254.99)N和(869.14±280-26)N,兩組之間差異無顯著性意義(P>0.05).實驗組有1例垂直根摺,其餘均為可脩複性根摺,兩組未見樁覈脫位現象.說明石英纖維複閤樹脂樁覈繫統脩複後的離體牙整體疲勞抗性優異.
배경:연구표명구강적일상저작공능회대섬유장핵수복체적항절성능산생영향.목적:평개석영섬유장복합수지핵전관수복적하합전마아적피로항성.방법:장정기발제적44과단근전마아분위실험조화대조조,매조22과,리체아행석영섬유장복합수지핵금속고자관수복,실험조행빈솔위6 Hz、차수위120만차적45°순배가재,대조조불진행순배가재,연후량조분별행속솔위1 mm,min적45°측향가재.기록아근출현절렬시적파배력치、아근적절렬모식이급장핵탈위정황.결과여결론:실험조화대조조적항하재력균치분별위(733.88±254.99)N화(869.14±280-26)N,량조지간차이무현저성의의(P>0.05).실험조유1례수직근절,기여균위가수복성근절,량조미견장핵탈위현상.설명석영섬유복합수지장핵계통수복후적리체아정체피로항성우이.
BACKGROUND: Studies demonstrate that there are some effects of oral masticatory function on the fracture resistance ability of the fiber post-core prosthesis.OBJECTIVE: To evaluate the fatigue resistance of lower premolars restored with quartz-fiber post-core and full crown. METHODS: Totally 44 single rooted lower premolars recently extracted from orthodontic patients were divided into the experimental and the control groups, with 22 teeth in each group. All the teeth were restored with fiber post-core and full crown. In the experimental group, loads were applied at an 45 to the long axis of the teeth with a cyclic loading at a 6 Hz frequency, and then both two groups were loaded at an 45 to the long axis of the teeth at a crosshead speed of 1 mm/min. The destructive force values, the fracture mode of root and the situation of post-core dislocation with root fracture were recorded.RESULTS AND CONCLUSION: The mean loading force was (733.88N 254.99) N and (869.14N 280.26) N in the experimental group and the control group, respectively, and there was no significant difference in two groups (P> 0.05). The experimental group had one case with vertical root fracture, the others had repairable root fracture and the dislocation of post-core did not happen in the two groups. The results demonstrated that there is a good fatigue resistance in the removed teeth with quartz-fiber post-core and full crown.