岩矿测试
巖礦測試
암광측시
ROCK AND MINERAL ANALYSIS
2009年
4期
376-378
,共3页
袁秀茹%余宇%赵峰%刘江斌%陈月源
袁秀茹%餘宇%趙峰%劉江斌%陳月源
원수여%여우%조봉%류강빈%진월원
X射线荧光光谱法%熔融玻璃片%粉末压片%主次量组分%白云岩
X射線熒光光譜法%鎔融玻璃片%粉末壓片%主次量組分%白雲巖
X사선형광광보법%용융파리편%분말압편%주차량조분%백운암
X-ray fluorescence spectrometry%fused bead%pressed power pellet%major and minor components%dolomite
针对白云岩主次量组分同时测定中存在的问题,采用熔融玻璃片和粉末压片法制样(运用熔片-压片法相结合),选用有关的国家一级标准物质和省二级标准物质,以经验α系数法和散射线内标法校正元素谱线重叠干扰和基体效应,采用X射线荧光光谱法对白云岩样品中的氧化钙、氧化镁、氧化铝、二氧化硅、磷、氧化锰、全三氧化二铁和硫8个组分进行测定,分析结果与标准值或化学值吻合,各组分12次重复测定的相对标准偏差小于10%.方法操作简便、快捷.
針對白雲巖主次量組分同時測定中存在的問題,採用鎔融玻璃片和粉末壓片法製樣(運用鎔片-壓片法相結閤),選用有關的國傢一級標準物質和省二級標準物質,以經驗α繫數法和散射線內標法校正元素譜線重疊榦擾和基體效應,採用X射線熒光光譜法對白雲巖樣品中的氧化鈣、氧化鎂、氧化鋁、二氧化硅、燐、氧化錳、全三氧化二鐵和硫8箇組分進行測定,分析結果與標準值或化學值吻閤,各組分12次重複測定的相對標準偏差小于10%.方法操作簡便、快捷.
침대백운암주차량조분동시측정중존재적문제,채용용융파리편화분말압편법제양(운용용편-압편법상결합),선용유관적국가일급표준물질화성이급표준물질,이경험α계수법화산사선내표법교정원소보선중첩간우화기체효응,채용X사선형광광보법대백운암양품중적양화개、양화미、양화려、이양화규、린、양화맹、전삼양화이철화류8개조분진행측정,분석결과여표준치혹화학치문합,각조분12차중복측정적상대표준편차소우10%.방법조작간편、쾌첩.
A method for the determination of CaO, MgO, Al2O3, SiO2, P, MnO, TFe2O3 and S in dolomite by X-ray fluorescence spectrometry with fusion and pressed power pellet sample preparation was developed. The interferences from spectral overlap and matrix effect were corrected by experience alpha coefficient and internal standard with scattered radiation. The method has been applied to the determination of these components in national and provincial standard reference materials and the results are in good agreement with the certified values with precision of less than 10%RSD (n = 12).