岩石力学与工程学报
巖石力學與工程學報
암석역학여공정학보
CHINESE JOURNAL OF ROCK MECHANICS AND ENGINEERING
2009年
11期
2193-2200
,共8页
桩基础%原状土切线模量法%刚性桩复合地基%沉降计算
樁基礎%原狀土切線模量法%剛性樁複閤地基%沉降計算
장기출%원상토절선모량법%강성장복합지기%침강계산
pile foundations%undisturbed soil tangent modulus method%rigid-pile composite foundation%settlement calculation
基于原状土切线模量法,对刚性桩复合地基的沉降计算提出一种新的沉降计算方法.该方法用切线模量法分别计算基础下土体和刚性桩的荷载-沉降过程曲线.依据共同作用时桩和桩间土的沉降相等的条件,对土体和刚性桩的荷载-沉降过程曲线进行复合得到刚性桩复合地基的荷载-沉降过程曲线,则刚性桩复合地基的沉降可以根据其荷载-沉降曲线得到.对于有复合地基的载荷试验的情况,提出直接利用其试验曲线建立复合地基的双曲线切线模量方程,利用该方程计算实际基础的沉降.通过工程实例表明,新的沉降计算方法具有较好的精度.
基于原狀土切線模量法,對剛性樁複閤地基的沉降計算提齣一種新的沉降計算方法.該方法用切線模量法分彆計算基礎下土體和剛性樁的荷載-沉降過程麯線.依據共同作用時樁和樁間土的沉降相等的條件,對土體和剛性樁的荷載-沉降過程麯線進行複閤得到剛性樁複閤地基的荷載-沉降過程麯線,則剛性樁複閤地基的沉降可以根據其荷載-沉降麯線得到.對于有複閤地基的載荷試驗的情況,提齣直接利用其試驗麯線建立複閤地基的雙麯線切線模量方程,利用該方程計算實際基礎的沉降.通過工程實例錶明,新的沉降計算方法具有較好的精度.
기우원상토절선모량법,대강성장복합지기적침강계산제출일충신적침강계산방법.해방법용절선모량법분별계산기출하토체화강성장적하재-침강과정곡선.의거공동작용시장화장간토적침강상등적조건,대토체화강성장적하재-침강과정곡선진행복합득도강성장복합지기적하재-침강과정곡선,칙강성장복합지기적침강가이근거기하재-침강곡선득도.대우유복합지기적재하시험적정황,제출직접이용기시험곡선건립복합지기적쌍곡선절선모량방정,이용해방정계산실제기출적침강.통과공정실례표명,신적침강계산방법구유교호적정도.
Based on undisturbed soil tangent modulus method,a new practical settlement calculation method for rigid- pile composite foundation is proposed. The load-settlement curve of soil under foundation and the load-settlement curve of rigid-pile are obtained by the undisturbed soil tangent modulus method. Considering that the settlement of pile and soil is equal when they support the foundation jointly,the load-settlement curve of the rigid-pile composite foundation is obtained based on the load-settlement curve of soil and the load-settlement curve of rigid-pile,then the settlement of rigid-pile composite foundation can be gotten from the load-settlement curve. For the composite foundation with loading test,the settlement of rigid-pile composite foundation can be calculated by the hyperbola tangent modulus equation which is put forward by directly using the test curve. The practical examples prove that the new method has more precision for settlement calculation.