石化技术与应用
石化技術與應用
석화기술여응용
PETROCHEMICAL TECHNOLOGY & APPLICATION
2010年
5期
399-401
,共3页
C5馏分%石油树脂%中和%水洗%乳化%树脂黏度%三氯化铝
C5餾分%石油樹脂%中和%水洗%乳化%樹脂黏度%三氯化鋁
C5류분%석유수지%중화%수세%유화%수지점도%삼록화려
分析了0.8万t/a C5加氢石油树脂装置中和水洗工艺中物料发生乳化现象的原因,并在小试的基础上,对装置进行了优化改造.结果表明,高黏度树脂液在从聚合釜进人中和釜时,由于温度骤降致使其黏度迅速增大,出现不溶小微团,这是导致物料发生乳化现象的主要原因.通过采取在聚合釜及中和釜之间增设溶剂稀释釜的改造措施,使树脂液先经稀释使其黏度降低后再进入中和水洗系统,可避免乳化现象的发生,处理后树脂的pH值为6~7,水含量为470~650 μg/g,氯含量为21~41μg/g,达到了设计值.
分析瞭0.8萬t/a C5加氫石油樹脂裝置中和水洗工藝中物料髮生乳化現象的原因,併在小試的基礎上,對裝置進行瞭優化改造.結果錶明,高黏度樹脂液在從聚閤釜進人中和釜時,由于溫度驟降緻使其黏度迅速增大,齣現不溶小微糰,這是導緻物料髮生乳化現象的主要原因.通過採取在聚閤釜及中和釜之間增設溶劑稀釋釜的改造措施,使樹脂液先經稀釋使其黏度降低後再進入中和水洗繫統,可避免乳化現象的髮生,處理後樹脂的pH值為6~7,水含量為470~650 μg/g,氯含量為21~41μg/g,達到瞭設計值.
분석료0.8만t/a C5가경석유수지장치중화수세공예중물료발생유화현상적원인,병재소시적기출상,대장치진행료우화개조.결과표명,고점도수지액재종취합부진인중화부시,유우온도취강치사기점도신속증대,출현불용소미단,저시도치물료발생유화현상적주요원인.통과채취재취합부급중화부지간증설용제희석부적개조조시,사수지액선경희석사기점도강저후재진입중화수세계통,가피면유화현상적발생,처리후수지적pH치위6~7,수함량위470~650 μg/g,록함량위21~41μg/g,체도료설계치.