华南理工大学学报(自然科学版)
華南理工大學學報(自然科學版)
화남리공대학학보(자연과학판)
JOURNAL OF SOUTH CHINA UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION)
2010年
5期
65-70
,共6页
刘玉荣%左青云%彭俊彪%黄美浅
劉玉榮%左青雲%彭俊彪%黃美淺
류옥영%좌청운%팽준표%황미천
薄膜晶体管%聚3-己基噻吩%稳定性%钝化
薄膜晶體管%聚3-己基噻吩%穩定性%鈍化
박막정체관%취3-기기새분%은정성%둔화
为提高聚合物薄膜晶体管的稳定性,以单晶硅为衬底,二氧化硅为栅介质层,聚3-己基噻吩(P3HT)薄膜为半导体活性层,金属Au为源、漏电极,制备出聚合物薄膜晶体管(PTFT),对该器件的电特性进行了表征,研究了该器件在空气环境下的稳定性,并对该器件在空气中的不稳定性机理进行了讨论.结果表明:当器件暴露在空气中时,随着暴露时间的增加,器件的饱和漏电流明显增大,阈值电压逐渐增加;空气中的水是影响器件特性的主要因素;通过采用光刻胶钝化处理可以有效地改善P3HT-PTFT器件在空气中的稳定性,并使器件的载流子迁移率提高3倍.
為提高聚閤物薄膜晶體管的穩定性,以單晶硅為襯底,二氧化硅為柵介質層,聚3-己基噻吩(P3HT)薄膜為半導體活性層,金屬Au為源、漏電極,製備齣聚閤物薄膜晶體管(PTFT),對該器件的電特性進行瞭錶徵,研究瞭該器件在空氣環境下的穩定性,併對該器件在空氣中的不穩定性機理進行瞭討論.結果錶明:噹器件暴露在空氣中時,隨著暴露時間的增加,器件的飽和漏電流明顯增大,閾值電壓逐漸增加;空氣中的水是影響器件特性的主要因素;通過採用光刻膠鈍化處理可以有效地改善P3HT-PTFT器件在空氣中的穩定性,併使器件的載流子遷移率提高3倍.
위제고취합물박막정체관적은정성,이단정규위츤저,이양화규위책개질층,취3-기기새분(P3HT)박막위반도체활성층,금속Au위원、루전겁,제비출취합물박막정체관(PTFT),대해기건적전특성진행료표정,연구료해기건재공기배경하적은정성,병대해기건재공기중적불은정성궤리진행료토론.결과표명:당기건폭로재공기중시,수착폭로시간적증가,기건적포화루전류명현증대,역치전압축점증가;공기중적수시영향기건특성적주요인소;통과채용광각효둔화처리가이유효지개선P3HT-PTFT기건재공기중적은정성,병사기건적재류자천이솔제고3배.