表面技术
錶麵技術
표면기술
SURFACE TECHNOLOGY
2009年
6期
51-53
,共3页
张微%龙军峰%张津%丁婷%余永梅%张红霞%马培培
張微%龍軍峰%張津%丁婷%餘永梅%張紅霞%馬培培
장미%룡군봉%장진%정정%여영매%장홍하%마배배
有机涂层%硅烷%附着力%耐蚀性%化学键
有機塗層%硅烷%附著力%耐蝕性%化學鍵
유궤도층%규완%부착력%내식성%화학건
Organic coating%Silane%Adhesion%Corrosion resistance%Chemical bond
为了提高镁合金的耐腐蚀性能,结合硅烷处理和胶粘涂层技术在AZ31镁合金表面制备了环氧防腐涂层.通过扫描电镜对涂层表面形貌进行观察,采用划格法、浸泡法及盐雾试验等分析镁合金表面硅烷处理对有机涂层的附着力及耐蚀性的影响.研究结果表明:采用KH-550型硅烷进行处理后,镁合金基体与有机涂层之间形成化学键,涂层与基体结合牢固,附着力为1级,耐饱和盐水23d不起泡.硅烷处理明显提高了有机涂层对基体的附着力和耐蚀性,因此,硅烷 + 胶粘涂层的方法可用于镁合金的表面防腐.
為瞭提高鎂閤金的耐腐蝕性能,結閤硅烷處理和膠粘塗層技術在AZ31鎂閤金錶麵製備瞭環氧防腐塗層.通過掃描電鏡對塗層錶麵形貌進行觀察,採用劃格法、浸泡法及鹽霧試驗等分析鎂閤金錶麵硅烷處理對有機塗層的附著力及耐蝕性的影響.研究結果錶明:採用KH-550型硅烷進行處理後,鎂閤金基體與有機塗層之間形成化學鍵,塗層與基體結閤牢固,附著力為1級,耐飽和鹽水23d不起泡.硅烷處理明顯提高瞭有機塗層對基體的附著力和耐蝕性,因此,硅烷 + 膠粘塗層的方法可用于鎂閤金的錶麵防腐.
위료제고미합금적내부식성능,결합규완처리화효점도층기술재AZ31미합금표면제비료배양방부도층.통과소묘전경대도층표면형모진행관찰,채용화격법、침포법급염무시험등분석미합금표면규완처리대유궤도층적부착력급내식성적영향.연구결과표명:채용KH-550형규완진행처리후,미합금기체여유궤도층지간형성화학건,도층여기체결합뢰고,부착력위1급,내포화염수23d불기포.규완처리명현제고료유궤도층대기체적부착력화내식성,인차,규완 + 효점도층적방법가용우미합금적표면방부.
The epoxy anticorrosive coating by combination silane pretreatment and adhesive coating methods was prepared on AZ31 magnesium alloy to improve its corrosion resistance. The morphology of coating was observed by SEM. The effects of silane pretreatment on the adhesion and corrosion resistance of the coating were analyzed by using scribe,immersion, salt spray tests and so on. The results show that after the pretreatment of AZ31 magnesium alloy with KH-550 silane coupling agent, there is chemical bond between the coating and the substrate, the adhesion of the coating can reach grade 1,and there is no change in saturated NaCl solution for 23d. Silane pretreatment can enhance remarkably the adhesion and corrosion resistance of the coating,so silane pretreatment and adhesive coatings are suit to magnesium alloys for protection.