光子学报
光子學報
광자학보
ACTA PHOTONICA SINICA
2010年
2期
251-254
,共4页
邹快盛%魏德亮%陆敏%侯超奇%马晶%叶腾
鄒快盛%魏德亮%陸敏%侯超奇%馬晶%葉騰
추쾌성%위덕량%륙민%후초기%마정%협등
保偏光纤%光子晶体光纤%全玻璃光纤%偏振度测试
保偏光纖%光子晶體光纖%全玻璃光纖%偏振度測試
보편광섬%광자정체광섬%전파리광섬%편진도측시
Polarization maintaining%Photonic crystal fiber%All-glass fiber%Polarization measurement
设计并采用棒管法结合毛细管堆积技术制备了一种全玻璃材料的实心保偏光子晶体光纤,光纤端面测试结果表明,这种结构设计有效克服了传统光子晶体光纤制造过程中空气孔易于塌陷的困难,光纤微结构保持良好.采用剪断法测得在1 550 nm波长下光纤的传输损耗为6.84 dB/m.测试了输出光的偏振度,结果表明该光纤具有较好的保偏特性,说明采用此方法研制具有高保偏性能且制作工艺简单的光子晶体光纤是可行的.
設計併採用棒管法結閤毛細管堆積技術製備瞭一種全玻璃材料的實心保偏光子晶體光纖,光纖耑麵測試結果錶明,這種結構設計有效剋服瞭傳統光子晶體光纖製造過程中空氣孔易于塌陷的睏難,光纖微結構保持良好.採用剪斷法測得在1 550 nm波長下光纖的傳輸損耗為6.84 dB/m.測試瞭輸齣光的偏振度,結果錶明該光纖具有較好的保偏特性,說明採用此方法研製具有高保偏性能且製作工藝簡單的光子晶體光纖是可行的.
설계병채용봉관법결합모세관퇴적기술제비료일충전파리재료적실심보편광자정체광섬,광섬단면측시결과표명,저충결구설계유효극복료전통광자정체광섬제조과정중공기공역우탑함적곤난,광섬미결구보지량호.채용전단법측득재1 550 nm파장하광섬적전수손모위6.84 dB/m.측시료수출광적편진도,결과표명해광섬구유교호적보편특성,설명채용차방법연제구유고보편성능차제작공예간단적광자정체광섬시가행적.
A kind of all-glass polarization maintaining PCF is designed and fabricated using rod-in-tube method and capillary-stacking technique.The microscopic end profile of the fiber exhibits an excellent maintenance in the fine structure of the PCF.Thus,this design has effectively overcome the defect of air-holes collapse in traditional PCF fabrication process.Measurement of the fiber attenuation with the cutback method is 6.84 dB/m at 1 550 nm.The polarization measurement indicates that the fiber has a good capability to maintain polarization.Therefore it is feasible to achieve the fiber that can effectively maintain polarization and is easy to be fabricated by this all-glass design.