材料导报
材料導報
재료도보
MATERIALS REVIEW
2010年
14期
108-111,115
,共5页
叶昉%张立同%成来飞%赵春年%王鹏飞
葉昉%張立同%成來飛%趙春年%王鵬飛
협방%장립동%성래비%조춘년%왕붕비
掺硼碳%表观活化能%反应控制机制
摻硼碳%錶觀活化能%反應控製機製
참붕탄%표관활화능%반응공제궤제
boron doped carbon%apparent active energy%kinetic control regime
以三氯化硼、甲烷和氢气的混合气体为前驱体,利用磁悬浮天平热重系统研究了850~1200℃区间内化学气相沉积掺硼碳的原位动力学.探索了温度对沉积速率的影响,计算了该温度区间内沉积过程的表观活化能,同时借助SEM和EDS技术.测试了不同温度点(900℃、1000℃、1100℃和1200℃)沉积产物的微观结构和成分.结果表明,化学气相沉积掺硼碳属于典型的热激活反应过程;在所研究的温度区间内存在5种不同的反应控制机制;随着温度的升高,沉积产物的n(B)/n(C)和堆积密度都显著变小,说明高n(B)/n(C)和高致密度的掺硼碳涂层应在较低的温度下制备.
以三氯化硼、甲烷和氫氣的混閤氣體為前驅體,利用磁懸浮天平熱重繫統研究瞭850~1200℃區間內化學氣相沉積摻硼碳的原位動力學.探索瞭溫度對沉積速率的影響,計算瞭該溫度區間內沉積過程的錶觀活化能,同時藉助SEM和EDS技術.測試瞭不同溫度點(900℃、1000℃、1100℃和1200℃)沉積產物的微觀結構和成分.結果錶明,化學氣相沉積摻硼碳屬于典型的熱激活反應過程;在所研究的溫度區間內存在5種不同的反應控製機製;隨著溫度的升高,沉積產物的n(B)/n(C)和堆積密度都顯著變小,說明高n(B)/n(C)和高緻密度的摻硼碳塗層應在較低的溫度下製備.
이삼록화붕、갑완화경기적혼합기체위전구체,이용자현부천평열중계통연구료850~1200℃구간내화학기상침적참붕탄적원위동역학.탐색료온도대침적속솔적영향,계산료해온도구간내침적과정적표관활화능,동시차조SEM화EDS기술.측시료불동온도점(900℃、1000℃、1100℃화1200℃)침적산물적미관결구화성분.결과표명,화학기상침적참붕탄속우전형적열격활반응과정;재소연구적온도구간내존재5충불동적반응공제궤제;수착온도적승고,침적산물적n(B)/n(C)화퇴적밀도도현저변소,설명고n(B)/n(C)화고치밀도적참붕탄도층응재교저적온도하제비.
Overall kinetics of the growth of boron doped carbon film deposited by chemical vapor deposition (CVD) from the mixture of boron trichloride (BCl3), methane (CH4) and hydrogen (H2) are determined by a mag-netic suspension microbalance. Effect of temperature (850~1200℃) on deposition rates is measured, apparent active energy is calculated, meanwhile, the morphology and composition of films at 900℃, 1000℃, 1100℃, 1200℃ are ob-served and analyzed using scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS) respective-ly. The results show that the deposition of boron doped carbon from BCl3-CH4-H2 by CVD is a typical thermal activa-tion process. Five regions are distinguishable in studied temperature range corresponding to five different reaction con-trol regimes according to the significant imparity among the apparent active energies calculated. The compact density and B/C molar ratio of deposits decrease obviously with temperature increasing, indicating high density and high B/C molar ratio films can be obtained at relatively low temperature.