佳木斯大学学报(自然科学版)
佳木斯大學學報(自然科學版)
가목사대학학보(자연과학판)
JOURNAL OF JIAMUSI UNIVERSITY (NATURAL SCIENCE EDITION)
2006年
2期
168-171
,共4页
胡海亭%胡明%吴明忠%郑小红
鬍海亭%鬍明%吳明忠%鄭小紅
호해정%호명%오명충%정소홍
高能球磨%复合粉%均匀性%致密性
高能毬磨%複閤粉%均勻性%緻密性
고능구마%복합분%균균성%치밀성
采用高能球磨技术制备了SiC和Al复合粉,利用扫描电镜对复合粉进行观察和分析.研究了球磨转速、球磨时间、碳化硅粒度以及SiC与Al质量比对复合粉粒度、均匀性和致密性的影响.结果表明,随着球磨时间的延长或转速的升高,颗粒的细化程度和均匀性都明显增加;采用双粒度的碳化硅颗粒与铝粉混合时,复合粉的致密性和均匀性提高更大.
採用高能毬磨技術製備瞭SiC和Al複閤粉,利用掃描電鏡對複閤粉進行觀察和分析.研究瞭毬磨轉速、毬磨時間、碳化硅粒度以及SiC與Al質量比對複閤粉粒度、均勻性和緻密性的影響.結果錶明,隨著毬磨時間的延長或轉速的升高,顆粒的細化程度和均勻性都明顯增加;採用雙粒度的碳化硅顆粒與鋁粉混閤時,複閤粉的緻密性和均勻性提高更大.
채용고능구마기술제비료SiC화Al복합분,이용소묘전경대복합분진행관찰화분석.연구료구마전속、구마시간、탄화규립도이급SiC여Al질량비대복합분립도、균균성화치밀성적영향.결과표명,수착구마시간적연장혹전속적승고,과립적세화정도화균균성도명현증가;채용쌍립도적탄화규과립여려분혼합시,복합분적치밀성화균균성제고경대.