沈阳建筑大学学报(自然科学版)
瀋暘建築大學學報(自然科學版)
침양건축대학학보(자연과학판)
JOURNAL OF SHENYANG ARCHITECTURAL AND CIVIL ENGINEERING INSTITUTE
2006年
6期
977-980
,共4页
刘梅英%陶成%朱广钦%苏永渤
劉梅英%陶成%硃廣欽%囌永渤
류매영%도성%주엄흠%소영발
聚合氯化铝钙%焙烧%酸溶%混凝
聚閤氯化鋁鈣%焙燒%痠溶%混凝
취합록화려개%배소%산용%혼응
目的 为了提高当前在水处理过程中广泛使用的聚铝产生的污泥难以脱水的性能.方法 以氧化铝和氧化钙为原料通过焙烧、酸溶、聚合干燥工艺制备新型高效混凝剂聚合氯化铝钙,采用络合滴定分析氧化铝和钙的含量、酸碱滴定分析盐基度,利用质量法测定废水中悬浮物考察处理效果.结果 高温焙烧对于合成聚合氯化铝钙具有重要的作用.焙烧温度为1 100℃,原料中氧化铝的质量分数在70%左右,酸溶时间为3 h左右制备出的混凝剂具有较好的性能.聚合氯化铝钙的混凝效能、产生污泥的脱水性能优于工业聚铝.结论 焙烧有利于聚合氯化铝钙的生成,70%左右氧化铝配比能生成高效的聚合氯化铝钙.酸溶时间与酸用量对聚合氯化铝钙中的钙含量影 响不大.新制备出的聚合氯化铝钙比传统聚合铝具有更好的混凝和污泥脱水性能.
目的 為瞭提高噹前在水處理過程中廣汎使用的聚鋁產生的汙泥難以脫水的性能.方法 以氧化鋁和氧化鈣為原料通過焙燒、痠溶、聚閤榦燥工藝製備新型高效混凝劑聚閤氯化鋁鈣,採用絡閤滴定分析氧化鋁和鈣的含量、痠堿滴定分析鹽基度,利用質量法測定廢水中懸浮物攷察處理效果.結果 高溫焙燒對于閤成聚閤氯化鋁鈣具有重要的作用.焙燒溫度為1 100℃,原料中氧化鋁的質量分數在70%左右,痠溶時間為3 h左右製備齣的混凝劑具有較好的性能.聚閤氯化鋁鈣的混凝效能、產生汙泥的脫水性能優于工業聚鋁.結論 焙燒有利于聚閤氯化鋁鈣的生成,70%左右氧化鋁配比能生成高效的聚閤氯化鋁鈣.痠溶時間與痠用量對聚閤氯化鋁鈣中的鈣含量影 響不大.新製備齣的聚閤氯化鋁鈣比傳統聚閤鋁具有更好的混凝和汙泥脫水性能.
목적 위료제고당전재수처리과정중엄범사용적취려산생적오니난이탈수적성능.방법 이양화려화양화개위원료통과배소、산용、취합간조공예제비신형고효혼응제취합록화려개,채용락합적정분석양화려화개적함량、산감적정분석염기도,이용질량법측정폐수중현부물고찰처리효과.결과 고온배소대우합성취합록화려개구유중요적작용.배소온도위1 100℃,원료중양화려적질량분수재70%좌우,산용시간위3 h좌우제비출적혼응제구유교호적성능.취합록화려개적혼응효능、산생오니적탈수성능우우공업취려.결론 배소유리우취합록화려개적생성,70%좌우양화려배비능생성고효적취합록화려개.산용시간여산용량대취합록화려개중적개함량영 향불대.신제비출적취합록화려개비전통취합려구유경호적혼응화오니탈수성능.