热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
20期
138-140,144
,共4页
激光熔覆%有限元模拟%温度场%应力场
激光鎔覆%有限元模擬%溫度場%應力場
격광용복%유한원모의%온도장%응력장
针对激光熔覆过程的特点,基于有限元分析软件ANSYS,对45钢送丝激光熔覆过程的温度场和应力场进行三维数值动态模拟.建模时采用实体单元和表面单元相结合的方式,采用参数化设计划分网格,施加热源载荷,设定初始条件和基本边界条件,对流边界条件进行求解.分析了激光熔覆过程中温度场在工件上的分布规律,揭示了整个时间历程上应力强度的变化规律,为提高激光熔覆质量提供了理论依据.
針對激光鎔覆過程的特點,基于有限元分析軟件ANSYS,對45鋼送絲激光鎔覆過程的溫度場和應力場進行三維數值動態模擬.建模時採用實體單元和錶麵單元相結閤的方式,採用參數化設計劃分網格,施加熱源載荷,設定初始條件和基本邊界條件,對流邊界條件進行求解.分析瞭激光鎔覆過程中溫度場在工件上的分佈規律,揭示瞭整箇時間歷程上應力彊度的變化規律,為提高激光鎔覆質量提供瞭理論依據.
침대격광용복과정적특점,기우유한원분석연건ANSYS,대45강송사격광용복과정적온도장화응력장진행삼유수치동태모의.건모시채용실체단원화표면단원상결합적방식,채용삼수화설계화분망격,시가열원재하,설정초시조건화기본변계조건,대류변계조건진행구해.분석료격광용복과정중온도장재공건상적분포규률,게시료정개시간역정상응력강도적변화규률,위제고격광용복질량제공료이론의거.