CAJ | 학술논문

设计了一种蓄电池板栅连铸机,该连铸机可实现蓄电池板栅的连续铸造。针对蓄电池板栅连铸过程中铅液在模具内快速凝固结晶的特点,分别进行了动模表面连续板栅型腔结构设计、定模内部供铅结构设计、模具温度控制结构设计、浇注过程气体保护结构设计,并进行了样机试制及板栅连铸试验,获得了蓄电池连铸板栅样品。
설계료일충축전지판책련주궤,해련주궤가실현축전지판책적련속주조。침대축전지판책련주과정중연액재모구내쾌속응고결정적특점,분별진행료동모표면련속판책형강결구설계、정모내부공연결구설계、모구온도공제결구설계、요주과정기체보호결구설계,병진행료양궤시제급판책련주시험,획득료축전지련주판책양품。
A continuous casting machine was designed herein, which had been used successfully for continuous casting battery grids. According to the characteristics of rapid solidification of molten lead in the mold during continuous casting of the grid, battery grid cave in the outer peripheral surface, molten lead passageway in the shoe, temperature control system of mold, gas shielded during the casting were designed. Trial production of continuous casting machine and test of continuous casting were carried out. The sample of grid was obtained successfully.