电工电气
電工電氣
전공전기
ELECTROTECHNICS ELECTRIC
2011年
9期
5-9,14
,共6页
风力发电%并网逆变器%双闭环%PI调节器
風力髮電%併網逆變器%雙閉環%PI調節器
풍력발전%병망역변기%쌍폐배%PI조절기
wind power generation%grid-connected inverter%double closed-loop%PI regulator
采用零极点对消和极点配置的方法分别设计了电流内环和电压外环的PI调节器参数,根据并网逆变器电流闭环系统的Bode图和零极图,分析了其电流内环闭环系统的稳定性,并对由该方法设计得到的PI参数进行了实验验证。实验结果表明,该双闭环PI调节器参数设计方法效果良好,能够满足系统设计要求。
採用零極點對消和極點配置的方法分彆設計瞭電流內環和電壓外環的PI調節器參數,根據併網逆變器電流閉環繫統的Bode圖和零極圖,分析瞭其電流內環閉環繫統的穩定性,併對由該方法設計得到的PI參數進行瞭實驗驗證。實驗結果錶明,該雙閉環PI調節器參數設計方法效果良好,能夠滿足繫統設計要求。
채용령겁점대소화겁점배치적방법분별설계료전류내배화전압외배적PI조절기삼수,근거병망역변기전류폐배계통적Bode도화령겁도,분석료기전류내배폐배계통적은정성,병대유해방법설계득도적PI삼수진행료실험험증。실험결과표명,해쌍폐배PI조절기삼수설계방법효과량호,능구만족계통설계요구。
Zero-pole cancellation and pole allocation methods were adopted to design PI regulator parameters of current inner loop and voltage external loop respectively.According to grid-connected inverter current closed-loop system's Bode diagram and zero-pole diagram,analysis was made to the stability of its current inner closed-loop system and experimental verification was carried out for PI parameters obtained from the method design.Experimental result shows that the double closed-loop PI regulator parameters design method is good in effect,being able to meet system design requirements.