合成橡胶工业
閤成橡膠工業
합성상효공업
CHINA SYNTHETIC RUBBER INDUSTRY
2012年
5期
356-360
,共5页
孔春丽%胡雁鸣%李杨%史正海%张学全
孔春麗%鬍雁鳴%李楊%史正海%張學全
공춘려%호안명%리양%사정해%장학전
丁二烯-异戊二烯共聚物%磷酸酯钕催化剂%顺式-1,4-结构%分子量分布
丁二烯-異戊二烯共聚物%燐痠酯釹催化劑%順式-1,4-結構%分子量分佈
정이희-이무이희공취물%린산지녀최화제%순식-1,4-결구%분자량분포
以2 -乙基己基磷酸单2-乙基己基酯钕盐(简称Nd)/氢化二异丁基铝(简称Al)/一氯二乙基铝(简称Cl)为催化剂进行丁二烯(Bd)和异戊二烯(Ip)共聚合,考察了反应条件对聚合反应的影响,并对产物结构进行了表征.结果表明,Nd/Al/Cl催化体系具有单一活性中心,所合成的Bd -1p共聚物为无规共聚物.催化剂制备时Ip用量越大,聚合活性越大,共聚物的分子量分布越窄.在c(Ip)/c(Nd)为50、c(Al)/c(Nd)为10、c(Cl)/c(Nd)为1.0,于60℃陈化2h制备催化剂,然后以己烷作溶剂,在c(Nd)/c(Bd)为6.8×10-4、Bd/Ip(摩尔比)为1/1的条件下,于50℃聚合8h,所得Bd - Ip共聚物具有高顺式结构,聚丁二烯链段的顺式-1,4 -结构摩尔分数为95.2%,聚异戊二烯链段的顺式-1,4 -结构摩尔分数为97.4%,且分子量分布较窄,为2.45.
以2 -乙基己基燐痠單2-乙基己基酯釹鹽(簡稱Nd)/氫化二異丁基鋁(簡稱Al)/一氯二乙基鋁(簡稱Cl)為催化劑進行丁二烯(Bd)和異戊二烯(Ip)共聚閤,攷察瞭反應條件對聚閤反應的影響,併對產物結構進行瞭錶徵.結果錶明,Nd/Al/Cl催化體繫具有單一活性中心,所閤成的Bd -1p共聚物為無規共聚物.催化劑製備時Ip用量越大,聚閤活性越大,共聚物的分子量分佈越窄.在c(Ip)/c(Nd)為50、c(Al)/c(Nd)為10、c(Cl)/c(Nd)為1.0,于60℃陳化2h製備催化劑,然後以己烷作溶劑,在c(Nd)/c(Bd)為6.8×10-4、Bd/Ip(摩爾比)為1/1的條件下,于50℃聚閤8h,所得Bd - Ip共聚物具有高順式結構,聚丁二烯鏈段的順式-1,4 -結構摩爾分數為95.2%,聚異戊二烯鏈段的順式-1,4 -結構摩爾分數為97.4%,且分子量分佈較窄,為2.45.
이2 -을기기기린산단2-을기기기지녀염(간칭Nd)/경화이이정기려(간칭Al)/일록이을기려(간칭Cl)위최화제진행정이희(Bd)화이무이희(Ip)공취합,고찰료반응조건대취합반응적영향,병대산물결구진행료표정.결과표명,Nd/Al/Cl최화체계구유단일활성중심,소합성적Bd -1p공취물위무규공취물.최화제제비시Ip용량월대,취합활성월대,공취물적분자량분포월착.재c(Ip)/c(Nd)위50、c(Al)/c(Nd)위10、c(Cl)/c(Nd)위1.0,우60℃진화2h제비최화제,연후이기완작용제,재c(Nd)/c(Bd)위6.8×10-4、Bd/Ip(마이비)위1/1적조건하,우50℃취합8h,소득Bd - Ip공취물구유고순식결구,취정이희련단적순식-1,4 -결구마이분수위95.2%,취이무이희련단적순식-1,4 -결구마이분수위97.4%,차분자량분포교착,위2.45.