中国激光
中國激光
중국격광
CHINESE JOURNAL OF LASERS
2009年
6期
1591-1594
,共4页
刘秀波%石世宏%傅戈雁%刘元富%穆俊世
劉秀波%石世宏%傅戈雁%劉元富%穆俊世
류수파%석세굉%부과안%류원부%목준세
激光技术%激光熔覆%显微组织%高温耐磨复合材料涂层%固体润滑%γ-TiAl合金
激光技術%激光鎔覆%顯微組織%高溫耐磨複閤材料塗層%固體潤滑%γ-TiAl閤金
격광기술%격광용복%현미조직%고온내마복합재료도층%고체윤활%γ-TiAl합금
以Ni-Cr-C-CaF2复合合金粉末为原料,采用激光熔覆技术,在γ-TiAl合金基体表面制备出高温自润滑耐磨复合材料涂层.采用X射线衍射(XRD)、扫描电子显微镜(SEM)和能谱仪(EDS)等手段对所制备复合材料涂层的显微组织进行了分析.结果表明,该复合材料涂层由初生的短棒状或树枝状TiC和次生的块状Al4C3碳化物增强相以及细小、弥散、球状分布的CaF2固体润滑颗粒均匀分布在塑韧性良好的NiCrAlTi(γ)固溶体基体中,其平均显微硬度约为HV 650,是基体TiAl合金的2倍.
以Ni-Cr-C-CaF2複閤閤金粉末為原料,採用激光鎔覆技術,在γ-TiAl閤金基體錶麵製備齣高溫自潤滑耐磨複閤材料塗層.採用X射線衍射(XRD)、掃描電子顯微鏡(SEM)和能譜儀(EDS)等手段對所製備複閤材料塗層的顯微組織進行瞭分析.結果錶明,該複閤材料塗層由初生的短棒狀或樹枝狀TiC和次生的塊狀Al4C3碳化物增彊相以及細小、瀰散、毬狀分佈的CaF2固體潤滑顆粒均勻分佈在塑韌性良好的NiCrAlTi(γ)固溶體基體中,其平均顯微硬度約為HV 650,是基體TiAl閤金的2倍.
이Ni-Cr-C-CaF2복합합금분말위원료,채용격광용복기술,재γ-TiAl합금기체표면제비출고온자윤활내마복합재료도층.채용X사선연사(XRD)、소묘전자현미경(SEM)화능보의(EDS)등수단대소제비복합재료도층적현미조직진행료분석.결과표명,해복합재료도층유초생적단봉상혹수지상TiC화차생적괴상Al4C3탄화물증강상이급세소、미산、구상분포적CaF2고체윤활과립균균분포재소인성량호적NiCrAlTi(γ)고용체기체중,기평균현미경도약위HV 650,시기체TiAl합금적2배.