CAJ | 학술논문

分析了近年来南方电网直调系统中由电流互感器故障所致的电网事故的特点和处理要点,指出电流互感器故障很多时候表现为单个元件保护动作跳闸,根据断路器和电流互感器布置位置,可以判断电流互感器非绝缘段的位置。对于母线跳闸事故,首先应对母差保护范围内一次设备外观进行检查;若多个设备同时跳闸,处于保护交叉范围内的电流互感器故障极有可能是引起事故的原因。
분석료근년래남방전망직조계통중유전류호감기고장소치적전망사고적특점화처리요점,지출전류호감기고장흔다시후표현위단개원건보호동작도갑,근거단로기화전류호감기포치위치,가이판단전류호감기비절연단적위치。대우모선도갑사고,수선응대모차보호범위내일차설비외관진행검사;약다개설비동시도갑,처우보호교차범위내적전류호감기고장겁유가능시인기사고적원인。
The characteristics and main handling points of power grid accidents in the direct dispatching system of China Southern Power Grid（CSG） recent years caused by current transformer failures are analyzed,and it is conclused that the accidents caused by TA failures are usually registered as trippings of a single protection component,and the non-isolated junction of the current transformer can be located according to the positions of the current transformer and related brakers.For bus faults,it needs to examine firstly the primary apparatuses in the differential protection range of bus bar over their exterior.In the case of multi-apparatuses,the accident is most likely caused by the current transformer fault in the overlapping scope of different protections.