中国有色金属学报（英文版）
中國有色金屬學報（英文版）
중국유색금속학보（영문판）
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2011年
z1期
7-11
,共5页
brazing%titanium%stainless steel%intermetallic compounds (IMCs)
The microstructures of the brazed joints for commercially pure Ti and stainless steel were investigated by the applications of various filler alloys including Ag-、 Ti-、 Zr- and Ni-based alloys. Generally, the dissimilar joints between Ti and stainless steel were dominated by the Ti-based intermetallic compounds (IMCs), e.g. (Ti, Zr)2(Fe, Ni), TiFe, TiCu, and Ti2(Fe. Ni), due to a significant dissolution of Ti from the base metal. The (Fe-Cr) σ phase was also observed near the stainless steel due to a segregation of Cr into the interface region. This research demonstrates empirically that the brittleness of the Ti and stainless steel joint can not be avoided only by applying single braze alloy or single insert metal, and thus an introduction of additional suitable interlayer between the filler alloy and the base metal is necessary to prevent the brittleness of the joint.
