口腔医学研究
口腔醫學研究
구강의학연구
JOURNAL OF ORAL SCIENCE RESEARCH
2012年
2期
121-124
,共4页
韩方凯%王铁梅%廖波%韩超%秦锦苏
韓方凱%王鐵梅%廖波%韓超%秦錦囌
한방개%왕철매%료파%한초%진금소
放大率%曲面体层%标记位点%体层域
放大率%麯麵體層%標記位點%體層域
방대솔%곡면체층%표기위점%체층역
目的:探讨数字化曲面体层(PTG)的标记位点放大率.方法:以曲面体层机颏托上的U型标记杆及以干燥下颌骨的正常摆放位置为参照,将种植用钢珠按牙弓形态进行唇舌向网点式排布,进行位点设置,按1-8区牙位排列放置钢珠,类似同心圆状辐射排列,位点间距10 mm,逐点拍摄,进行投照后在PACS上高清晰显示屏进行测量所得图像的水平向及垂直向数值,对图像进行分析,得出放大率,再进行部位分析,构建体层域.结果:水平向放大率较垂直向为显著,U型标记杆覆盖范围为前牙及双尖牙区,其唇侧水平向放大率均小于1,舌侧水平向放大率均大于1,后磨牙区图像垂直向与水平向均为放大.结论:不同位置的钢珠图像放大率不同,坐标相交点即为同等放大率位置,即位于体层域中心,体层域为显示图像较为真实的扫描区域,体层域唇侧图像水平向缩窄舌侧图像水平向放大,而垂直向均显示放大,变化倍率以水平向为显著(P<0.01),以此来指导临床上对曲面体层片的判读.
目的:探討數字化麯麵體層(PTG)的標記位點放大率.方法:以麯麵體層機頦託上的U型標記桿及以榦燥下頜骨的正常襬放位置為參照,將種植用鋼珠按牙弓形態進行脣舌嚮網點式排佈,進行位點設置,按1-8區牙位排列放置鋼珠,類似同心圓狀輻射排列,位點間距10 mm,逐點拍攝,進行投照後在PACS上高清晰顯示屏進行測量所得圖像的水平嚮及垂直嚮數值,對圖像進行分析,得齣放大率,再進行部位分析,構建體層域.結果:水平嚮放大率較垂直嚮為顯著,U型標記桿覆蓋範圍為前牙及雙尖牙區,其脣側水平嚮放大率均小于1,舌側水平嚮放大率均大于1,後磨牙區圖像垂直嚮與水平嚮均為放大.結論:不同位置的鋼珠圖像放大率不同,坐標相交點即為同等放大率位置,即位于體層域中心,體層域為顯示圖像較為真實的掃描區域,體層域脣側圖像水平嚮縮窄舌側圖像水平嚮放大,而垂直嚮均顯示放大,變化倍率以水平嚮為顯著(P<0.01),以此來指導臨床上對麯麵體層片的判讀.
목적:탐토수자화곡면체층(PTG)적표기위점방대솔.방법:이곡면체층궤해탁상적U형표기간급이간조하합골적정상파방위치위삼조,장충식용강주안아궁형태진행진설향망점식배포,진행위점설치,안1-8구아위배렬방치강주,유사동심원상복사배렬,위점간거10 mm,축점박섭,진행투조후재PACS상고청석현시병진행측량소득도상적수평향급수직향수치,대도상진행분석,득출방대솔,재진행부위분석,구건체층역.결과:수평향방대솔교수직향위현저,U형표기간복개범위위전아급쌍첨아구,기진측수평향방대솔균소우1,설측수평향방대솔균대우1,후마아구도상수직향여수평향균위방대.결론:불동위치적강주도상방대솔불동,좌표상교점즉위동등방대솔위치,즉위우체층역중심,체층역위현시도상교위진실적소묘구역,체층역진측도상수평향축착설측도상수평향방대,이수직향균현시방대,변화배솔이수평향위현저(P<0.01),이차래지도림상상대곡면체층편적판독.