中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2012年
2期
236-239,247
,共5页
刘兵%王定标%梁珍祥%朱有健
劉兵%王定標%樑珍祥%硃有健
류병%왕정표%량진상%주유건
二次冷却%连铸%传热系数%喷嘴性能
二次冷卻%連鑄%傳熱繫數%噴嘴性能
이차냉각%련주%전열계수%분취성능
secondary cooling%continuous casting%heat transfer coefficient%characteristics of nozzle
根据非稳态传热学原理,采用对大钢坯试样一侧加热使其温度达到实际连铸二冷区板坯温度,在试样另一侧进行喷水冷却的实验方法,模拟连铸二冷区喷嘴喷水对板坯的冷却过程。实验结果表明:无论哪种形式的喷嘴,随着喷水压力的增大,传热系数都在增大;钢含碳量的高低对传热系数有一定的影响,含碳量越高,传热系数相对更大。将实验结果和工厂实际采集的生产数据计算得到的结果进行比较可知,实验结果和工厂实际生产数据计算所得结果的绝对误差在5%以内,可以满足实际工程生产的需要。
根據非穩態傳熱學原理,採用對大鋼坯試樣一側加熱使其溫度達到實際連鑄二冷區闆坯溫度,在試樣另一側進行噴水冷卻的實驗方法,模擬連鑄二冷區噴嘴噴水對闆坯的冷卻過程。實驗結果錶明:無論哪種形式的噴嘴,隨著噴水壓力的增大,傳熱繫數都在增大;鋼含碳量的高低對傳熱繫數有一定的影響,含碳量越高,傳熱繫數相對更大。將實驗結果和工廠實際採集的生產數據計算得到的結果進行比較可知,實驗結果和工廠實際生產數據計算所得結果的絕對誤差在5%以內,可以滿足實際工程生產的需要。
근거비은태전열학원리,채용대대강배시양일측가열사기온도체도실제련주이랭구판배온도,재시양령일측진행분수냉각적실험방법,모의련주이랭구분취분수대판배적냉각과정。실험결과표명:무론나충형식적분취,수착분수압력적증대,전열계수도재증대;강함탄량적고저대전열계수유일정적영향,함탄량월고,전열계수상대경대。장실험결과화공엄실제채집적생산수거계산득도적결과진행비교가지,실험결과화공엄실제생산수거계산소득결과적절대오차재5%이내,가이만족실제공정생산적수요。
The experimental study is based on unsteady state heat conduction theory. The large steel samples were heated to surface temperature of actual temperature of the slab one side and conducted for water cooling the other side. Experiments were carried out to simulate the influences of nozzles on process of continuous casting billet in secondary cooling zone. The experimental results show that either form of the nozzle, the general trend indicate that heat transfer coefficient increases with pressure increasing. The impact of different kinds of steel was studied, experiments show that the level of carbon content of steel effects on the heat transfer coefficient to a certain extent,heat transfer coefficient is larger with a the higher the carbon content. The experimental results and the actual plant measurements to compare the data calculated, the error is within 5%, which meets the engineering needs.