固体火箭技术
固體火箭技術
고체화전기술
JOURNAL OF SOLID ROCKET TECHNOLOGY
2011年
4期
488-491
,共4页
左海丽%肖乐勤%菅晓霞%周伟良
左海麗%肖樂勤%菅曉霞%週偉良
좌해려%초악근%관효하%주위량
GAP%热塑性弹性体%硝化棉%共混
GAP%熱塑性彈性體%硝化棉%共混
GAP%열소성탄성체%초화면%공혼
采用扩链后共混再熟化的方法,制备了1组不同组成的硝化棉(NC)/含能热塑性弹性体(GAP-TPE)共混聚合物.采用红外光谱(FTIR)和X射线衍射(XRD)表征NC/GAP-TPE共混物的结构,扫描电镜(SEM)观察共混物的断面,动态热机械分析(DMA)测定共混物的玻璃化转变,运用拉伸实验研究不同配比NC/GAP-TPE共混物的力学性能.结果表明,NC和GAP-TPE分子间存在氢键相互作用.NC均匀分散在GAP-TPE基体中,不同配比的NC/GAP-TPE共混物均存在1个玻璃化温度,二者之间具有较好的相容性.当NC含量从5%到20%变化时,共混试样的拉伸强度从10.4 MPa增加至20.4 MPa,提高了49%.
採用擴鏈後共混再熟化的方法,製備瞭1組不同組成的硝化棉(NC)/含能熱塑性彈性體(GAP-TPE)共混聚閤物.採用紅外光譜(FTIR)和X射線衍射(XRD)錶徵NC/GAP-TPE共混物的結構,掃描電鏡(SEM)觀察共混物的斷麵,動態熱機械分析(DMA)測定共混物的玻璃化轉變,運用拉伸實驗研究不同配比NC/GAP-TPE共混物的力學性能.結果錶明,NC和GAP-TPE分子間存在氫鍵相互作用.NC均勻分散在GAP-TPE基體中,不同配比的NC/GAP-TPE共混物均存在1箇玻璃化溫度,二者之間具有較好的相容性.噹NC含量從5%到20%變化時,共混試樣的拉伸彊度從10.4 MPa增加至20.4 MPa,提高瞭49%.
채용확련후공혼재숙화적방법,제비료1조불동조성적초화면(NC)/함능열소성탄성체(GAP-TPE)공혼취합물.채용홍외광보(FTIR)화X사선연사(XRD)표정NC/GAP-TPE공혼물적결구,소묘전경(SEM)관찰공혼물적단면,동태열궤계분석(DMA)측정공혼물적파리화전변,운용랍신실험연구불동배비NC/GAP-TPE공혼물적역학성능.결과표명,NC화GAP-TPE분자간존재경건상호작용.NC균균분산재GAP-TPE기체중,불동배비적NC/GAP-TPE공혼물균존재1개파리화온도,이자지간구유교호적상용성.당NC함량종5%도20%변화시,공혼시양적랍신강도종10.4 MPa증가지20.4 MPa,제고료49%.