应用科技
應用科技
응용과기
YING YONG KE JI
2011年
12期
55-60
,共6页
李吉庆%刘洋%赵新玲%巫瑞智
李吉慶%劉洋%趙新玲%巫瑞智
리길경%류양%조신령%무서지
镁锂合金%铝%晶格常数%微观应变%硬度
鎂鋰閤金%鋁%晶格常數%微觀應變%硬度
미리합금%려%정격상수%미관응변%경도
采用X射线衍射方法测算Mg-5Li-xAl合金α-Mg相晶格常数及微观应变,研究不同含量的Al元素对镁锂合金中α -Mg相晶格常数及微观应变的影响.结果表明,铸态Mg-5Li-xAl合金主要是由α-Mg基体和AlLi相组成;随着Al含量增加,α-Mg相的衍射峰向高角度偏移,晶格常数下降,合金的微观应变增加,其原因是固溶进入α-Mg相基体中的Al原子和析出的AlLi相共同作用所致;铸态Mg-5Li-xAl合金的硬度随着Al含量增加而增大,Al添加量在3%~5%时合金硬度的增长率要高于Al添加量在0~3%时硬度的增长率.
採用X射線衍射方法測算Mg-5Li-xAl閤金α-Mg相晶格常數及微觀應變,研究不同含量的Al元素對鎂鋰閤金中α -Mg相晶格常數及微觀應變的影響.結果錶明,鑄態Mg-5Li-xAl閤金主要是由α-Mg基體和AlLi相組成;隨著Al含量增加,α-Mg相的衍射峰嚮高角度偏移,晶格常數下降,閤金的微觀應變增加,其原因是固溶進入α-Mg相基體中的Al原子和析齣的AlLi相共同作用所緻;鑄態Mg-5Li-xAl閤金的硬度隨著Al含量增加而增大,Al添加量在3%~5%時閤金硬度的增長率要高于Al添加量在0~3%時硬度的增長率.
채용X사선연사방법측산Mg-5Li-xAl합금α-Mg상정격상수급미관응변,연구불동함량적Al원소대미리합금중α -Mg상정격상수급미관응변적영향.결과표명,주태Mg-5Li-xAl합금주요시유α-Mg기체화AlLi상조성;수착Al함량증가,α-Mg상적연사봉향고각도편이,정격상수하강,합금적미관응변증가,기원인시고용진입α-Mg상기체중적Al원자화석출적AlLi상공동작용소치;주태Mg-5Li-xAl합금적경도수착Al함량증가이증대,Al첨가량재3%~5%시합금경도적증장솔요고우Al첨가량재0~3%시경도적증장솔.