热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2009年
6期
107-109,112
,共4页
胡文斌%王建江%张龙%杜心康
鬍文斌%王建江%張龍%杜心康
호문빈%왕건강%장룡%두심강
SHS反应火焰喷涂%陶瓷涂层%高铬铸铁
SHS反應火燄噴塗%陶瓷塗層%高鉻鑄鐵
SHS반응화염분도%도자도층%고락주철
以Ti-B4C-蔗糖-Al和Ni-Al自粘结复合粉为喷涂体系,通过白蔓延反应火焰喷涂技术,采用梯度过渡涂层设计,在高铬铸铁泵叶表面制备了梯度过渡陶瓷涂层.主要研究了喷涂工艺、涂层性能以及喷涂前后基体组织及性能变化等问题.结果表明:利用自蔓延反应火喷涂技术在高铬铸铁表面制备梯度过渡陶瓷涂层是可行的:引入梯度过渡涂层设计后尽管使涂层的显微硬度有所下降,涂层孔隙率有一定增大,但可以明显改善陶瓷涂层与基体的结合,提高结合强度,同时不会造成基体材料和性能发生明显变化.
以Ti-B4C-蔗糖-Al和Ni-Al自粘結複閤粉為噴塗體繫,通過白蔓延反應火燄噴塗技術,採用梯度過渡塗層設計,在高鉻鑄鐵泵葉錶麵製備瞭梯度過渡陶瓷塗層.主要研究瞭噴塗工藝、塗層性能以及噴塗前後基體組織及性能變化等問題.結果錶明:利用自蔓延反應火噴塗技術在高鉻鑄鐵錶麵製備梯度過渡陶瓷塗層是可行的:引入梯度過渡塗層設計後儘管使塗層的顯微硬度有所下降,塗層孔隙率有一定增大,但可以明顯改善陶瓷塗層與基體的結閤,提高結閤彊度,同時不會造成基體材料和性能髮生明顯變化.
이Ti-B4C-자당-Al화Ni-Al자점결복합분위분도체계,통과백만연반응화염분도기술,채용제도과도도층설계,재고락주철빙협표면제비료제도과도도자도층.주요연구료분도공예、도층성능이급분도전후기체조직급성능변화등문제.결과표명:이용자만연반응화분도기술재고락주철표면제비제도과도도자도층시가행적:인입제도과도도층설계후진관사도층적현미경도유소하강,도층공극솔유일정증대,단가이명현개선도자도층여기체적결합,제고결합강도,동시불회조성기체재료화성능발생명현변화.