热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2007年
9期
38-40,52
,共4页
郑中甫%孟祥东%张茂勋%何福善
鄭中甫%孟祥東%張茂勛%何福善
정중보%맹상동%장무훈%하복선
碳%高铬铸铁%力学性能%耐磨性能
碳%高鉻鑄鐵%力學性能%耐磨性能
탄%고락주철%역학성능%내마성능
通过力学性能、耐磨性能测试、金相组织观察、SEM形貌分析以及残余奥氏体测定,研究了碳含量对高铬铸铁性能的影响.试验结果表明,随着含碳量的增加,冲击韧度、残余奥氏体含量、滑动式磨损率下降;硬度随着含碳量的增加先上升,而后出现下降趋势;滚筒式磨损条件下,含1.8% C(质量分数)的高铬铸铁磨损率最小,耐磨性能最好.
通過力學性能、耐磨性能測試、金相組織觀察、SEM形貌分析以及殘餘奧氏體測定,研究瞭碳含量對高鉻鑄鐵性能的影響.試驗結果錶明,隨著含碳量的增加,遲擊韌度、殘餘奧氏體含量、滑動式磨損率下降;硬度隨著含碳量的增加先上升,而後齣現下降趨勢;滾筒式磨損條件下,含1.8% C(質量分數)的高鉻鑄鐵磨損率最小,耐磨性能最好.
통과역학성능、내마성능측시、금상조직관찰、SEM형모분석이급잔여오씨체측정,연구료탄함량대고락주철성능적영향.시험결과표명,수착함탄량적증가,충격인도、잔여오씨체함량、활동식마손솔하강;경도수착함탄량적증가선상승,이후출현하강추세;곤통식마손조건하,함1.8% C(질량분수)적고락주철마손솔최소,내마성능최호.